Advertisement
care and cleaning
G
Never start cleaning until the oil has cooled
down.
G
Always unplug and remove the electronic control unit
before cleaning.
G
Ensure everything's completely dry before
reassembling.
electronic control unit
G
Never put it in water.
G
Before removing the electronic control unit check that
the cord is released from the cord storage area at the
back of the fryer
G
Pull out. Wipe with a damp cloth and dry thoroughly.
lid
G
Remove and soak in hot soapy water for 20 minutes.
basket
G
After each use, remove and soak in hot soapy water for
20 minutes. Then use a stiff brush.
fryer body and bowl
G
Soak in hot soapy water for 20 minutes. Then use a
non-abrasive cleaner.
G
If you have a dishwasher everything - except the
electronic control unit - is dishwasher safe. Your
dishwasher may darken the inside of the lid but it will
still work perfectly. For baked on oil, we recommend
soaking the bowl prior to dishwashing.
.
service and customer care
G
If the cord is damaged it must, for safety reasons, be
replaced by Kenwood or an authorised Kenwood
repairer.
G
If you experience any problems with the
operation of the fryer, before calling for
assistance refer to the troubleshooting guide.
UK
If you need help with:
G
using your fryer or
G
servicing or repairs (in or out of guarantee)
call Kenwood on 023 92392333 and ask for
Customer Care. Have your model number ready
- it's on the underside of the fryer.
spares and attachments
call 0870 2413653
other countries
G
Contact the shop where you bought your fryer.
guarantee (UK only)
If your fryer goes wrong within one year from the date
you bought it, we will repair or where necessary replace
it free of charge provided:
G
you have not misused, neglected or damaged it;
G
it has not been modified (unless by Kenwood);
G
it is not second-hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly; and
G
you supply your receipt to show when you
bought it.
This guarantee does not affect your statutory rights.
5
Advertisement
