Table of Contents
Advertisement
Audio Control
[Bass Boost] Sets the amount of bass boost.
(DNX7240BT only)
"OFF"/ "Step1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
Equalizer Control
You can set up the equalizer.
1
Display the Equalizer screen
>
Touch [
]
[
2
Set each item
DNX7240BT
DDX6054
[SystemQ] Selects an equalizer curve type.
You can select any of the following equalizer
curves.
"Natural"/ "Rock"/ "Pops"/ "Easy"/ "Top40"/
"Jazz"/ "Game"*/ "iPod"*/ "User"
⁄
•
* DNX7240BT only.
•
"User" can be selected after graphic equalizer
adjustment is carried out. See <Graphic Equalizer
Setup> (page 54).
•
"User" can be selected after tone adjustment is
carried out. See <Tone Setup> (page 55).
•
"iPod" uses the its equalizer function. Only iPod
sources can be selected.
54
DNX7240BT/DDX6054
>
]
[Equalizer]. (page 53)
[SystemQ-Ex] Selects items to be adjusted for
tone curve setup. (DDX6054 only)
If turned "OFF", only Level can be setup for
tone curves.
[EQ] Displays the Graphic Equalizer setup
screen. (page 54) (DNX7240BT only)
[Tone] Displays the Tone curve setup screen.
(page 55) (DDX6054 only)
Graphic Equalizer Setup (DNX7240BT)
You can Manually set the equalizer curve.
1
Display the Equalizer screen
>
>
Touch [
]
[
]
2
Display the Graphic Equalizer screen
3
Set the Graphic Equalizer
1
1
1
1 Gain level can be adjusted by touching the
each frequency bar.
[2], [3] Sets a frequency.
[5], [∞] Sets a gain level.
[EQ Init] Returns to the previous level which
the gain level is adjusted.
[Flat] Tone curve becomes flat.
[Bass EXT] Bass Extend settings.
If turned "ON", it extends the 62.5 Hz to the
low register by approximately 20%.
[SW Level] Adjusts the subwoofer volume.
[Equalizer]. (page 53)
Advertisement
Chapters
Table of Contents
