Wireless Body Analysis Scale (HS5) OWNER’S MANUAL Table of Contents INTRODUCTION PACKAGE CONTENTS INTENDED USE IMPORTANT NOTE FOR USERS CONTRAINDICATION PARTS AND DISPLAY INDICATORS SET UP REQUIREMENTS SET UP PROCEDURES SET UP THE SCALE’S WI-FI CONNECTION MEASUREMENT INSTRUCTIONS SPECIFICATIONS...
Thank you for purchasing the iHealth Wireless Body Analysis Scale. You will now be able to measure, track, and share vital body composition parameters from the comfort of your home. In addition to body weight, the iHealth Wireless Body Analysis Scale measures: • BMI •...
Please consult your healthcare provider for more information. Always store the iHealth Wireless Body Analysis Scale in a dry place. To ensure accurate results, keep the Scale away from magnetic fields as these may adversely affect results or possibly damage the Scale.
User Body Fat Wirless Signal Settings SET UP REQUIREMENTS The iHealth Wireless Body Analysis Scale is designed to be used with the following iPod touch, iPhone and iPad models: iPod touch (4th generation) iPhone 4S iPhone 4 iPhone 3GS iPad (3rd generation)
STEP 2: Turn Bluetooth “On” on your iOS device and it will start searching for the Scale. STEP 3: Wait until the model name, “iHealth HS5xxxxx” , and “Not Paired” appear on your device’s Bluetooth screen. Select the model name “iHealth HS5xxxxx” to pair and connect.
STEP 4: Select “Allow” in the pop-up window, as shown below. STEP 5: The wireless signal icon on the Scale’s display will flash for a few seconds and then stabilize when Wi-Fi connection is successful. The Scale should display as shown below.
Page 8
Taking Measurements Without iOS Device Up to 20 people can use the Scale. The Scale determines who the...
Page 9
user is by matching the new weight with weight previously recorded. If the weight of two or more users is similar, the Scale will display the user number (e.g. User # “x”). Step lightly on the lower left corner to select the appropriate user, and then step lightly on the lower right corner to confirm.
Operating Instructions For more detailed operating instructions, please visit www.ihealthlabs.com or the FAQ section of the iHealth App on your iOS device. SPECIFICATIONS 1. Product name: iHealth Wireless Body Analysis Scale 2. Model: HS5 3. Classification: internally powered, type BF applied part (four electrodes) 4.
GENERAL SAFETY AND PRECAUTIONS 1. Read all of the information in the Owner’s Manual and other included product information in the packaging before operating this product. 2. Please stand on the Scale with bare feet, keeping as still as possible until the results appear on the display. Do not stand on the edge of the Scale as you may fall or receive inaccurate measurements.
15. Changes or modifications not expressly approved by iHealth Lab Inc. invalidate the user’s warranty for this equipment. 16. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Page 13
The Scale displays “Er 0”, and then replace with a new set of “Er3”,”Er6”, “Er7”, “Er8” batteries. If problem persists, please contact iHealth Customer Service. The Scale displays “Er 1” The current weight may be beyond the measurement range of 330 lbs/150 kg.
The Scale displays “Er 5” Make sure Scale is connected to a router. Make sure router is connected to internet. The Scale displays “- - - -” The Scale failed to detect body impedance. Make sure you step on all four electrodes with bare feet, and try again.
Page 15
Bluetooth ® Bluetooth SIG, Inc. and any use of such marks by iHealth Lab Inc. is permitted under license. “Made for iPod”, “Made for iPhone”, and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been...
Need help?
Do you have a question about the HS5 and is the answer not in the manual?
Questions and answers