Table of Contents
Advertisement
na the ranae
INSTALLING
THE ANTI-TIP
DEVICE
A__ W ARNING
To reduce the risk of tipping, the appliance must be secured by properly
WARNING
installing the Anti-Tip device packed with the appliance.
,
Refer to the installation instructions supplied with the bracket.
,
Unless properly installed, the range could be tipped by stepping or sitting on the door. Injury may
result from spilled hot liquids or from the range itself.
*approximately t
21/32"(1
Screw must enter wood or I
concrete
r_
nti_Tip
bracket
/
*NOTE: To install Anti-Tip bracket,
release the leveling leg. A minimum
clearance of 21/32"(16.5mm)is required
between the range bottom and the
kitchen floor.
1. Locate the bracket using the template
The Anti-Tip bracket is packaged with a template. The instructions include information necessary to
complete the installation. Read and follow the instructions on the sheet (template) for range installation.
2. Level the range
Level the range by adjusting the leveling legs with a wrench.
Raise range
Lower range
Leveling leg
Iqstall qg the raqge 11
Installation-USADG68-00108E-01_EN.indd
11
2011-03-18
UI]4:06:29
Hide quick links:
Advertisement
Table of Contents
