Phone; Connection - Nokia 5630 User Manual

S e t t i n g s
Before changing any certificate settings, you must
make sure that you really trust the owner of the
certificate and that the certificate really belongs to
the listed owner.
Factory settings — to reset some of the settings to their
original values. You need the lock code.
Positioning (network service) — to change positioning
settings.

Phone

See "Call settings", p. 27.

Connection

Select > Settings > Settings
the following:
Bluetooth — to switch Bluetooth technology on or off, and
edit Bluetooth settings. See
settings", p. 75.
USB — to edit USB settings.
Destinations — to define the connection methods used for
reaching a particular destination
Packet data — to select the packet data connection
settings. The packet data settings affect all access points
using a packet data connection.
68
Copyright © 2009 Nokia. All rights reserved.
> Connection and from
"Bluetooth connection
• To set the device to register to the packet data
network when you are in a network that supports
packet data, select Packet data connection
available. If you select
uses a packet data connection only if you start an
application or function that needs it.
• To set the access point name to use your device as a
modem with your computer, select
• To enable the use of HSDPA (network service) in
UMTS networks, select
When HSDPA support is activated, downloading data
such as messages, e-mail, and browser pages
through the cellular network may be faster.
Video sharing — to set your SIP profile settings manually.
See "Video sharing settings",
SIP settings — to view and edit session initiation protocol
(SIP) profiles. See "Video sharing",
Configurations — to view and delete configuration
contexts. Certain functions, such as web browsing and
multimedia messaging, may require configuration settings.
You may receive the settings from your service provider.
See "Configuration settings",
APN control — to restrict the use of packet data access
points. This setting is only available if your SIM card
supports the service. To change the settings, you need the
PIN2 code.
> When
When needed, the device
Access point.
High speed packet access.
p. 29.
p. 28.
p. 16.