Connecting the Cold Water Supply Our customer service advisors will require this information whenever you contact Connecting the Drainage Pipe Hoover. Please keep all documentation in a safe place for future reference or for any Levelling the Machine future owners.
Customer Service Caring for the environment At Hoover, we aim to make appliances that are reliable and long lasting. However, Together, we share the responsibility to safeguard our environment for future should your appliance need to be serviced during its working life, no one is more generations.
This machine is solely for domestic use, i.e. to wash, rinse and spin dry household Contact an authorised serviceman and ask them to use official Hoover spare parts. textiles and garments.
Unpacking the Product Installation Remove the machine from its packaging close to the final location of the machine. Before installing the machine, ensure that the mains plug and water supply valves are easily accessible from your chosen machine location. Make sure there is enough space for the machine. Select a space at least 600mm wide Step 1.
Water Supply Connecting the Cold Water Supply This machine should only be connected to a cold-water supply. The cold-water pressure should be between 0.5 and 8 bar (0.05-0.8 Mpa). Only one hose is required to install this machine to a cold water supply. Cold fill is an energy efficient system.
Connecting the drainage pipe Levelling The Machine This machine must be connected in accordance with the water supply regulations. Your machine is heavy so care must be taken when moving it. Water bylaws prohibit connection to a surface water drain. We recommend that two people move the machine to avoid strain and possible injury.
Description of the Machine Selector to the OFF position. The Hoover VisionHD ZD 9 washing machine details are indicated below: Step 6. Select the spin programme and press the Start Pause button to start the machine. If the machine takes longer than one minute to empty check the drain hose for kinks.
Door Locked indicator The Control Panel The Door Locked indicator light is illuminated when the door is fully closed and the machine is ON. Spin Speed Selector When Start Pause is pressed on the machine with the door closed the indicator will flash momentarily and then illuminate.
Spin Speed Sensitive Care When a programme is selected the maximum spin speed allowed for that programme The Sensitive Care option washes your clothes in a deeper than normal water level to appears on the display. Pressing the Spin Speed button will reduce the speed by provide gentler washing for especially delicate fabrics, while detergent is removed 100rpm each time the button is pressed.
Fast Iron Wash Time Selector This function is designed to reduce creasing of your clothes during your wash cycle, Once the programme has been selected the indicator light will automatically show the and is tailored to specific fabric types. This option is only available on Synthetics, minimum time required for that programme.
Rinse Programme Descriptions This programme carries out three rinses with an intermediate spin (which can be reduced or excluded by using the Spin Speed option). It can be used for rinsing any For handling the various types of fabric and their level of dirtiness in your laundry the type of fabric e.g.
Dispensing in the drum Detergent Liquid detergents and some tablets are dispensed via the machine drum using the Only use detergents that are suitable for use in a washing machine. You will obtain recommended dispensing device which is placed upright on top of the wash load the best results from your wash with the minimum use of chemical products, and the towards the back of the drum.
Washing Advice Running a Wash Cycle The following tips are designed to assist in getting the best results from your machine This section summarises the main points when completing a wash cycle. For detailed whilst using it in the most environmentally friendly and economical way. It is also explanations of features, options and details of the machine refer to the relevant important to understand the items to avoid in your laundry, to ensure the continued section in the instruction manual.
the wash cycle, the KG Mode will weigh the clothes and update the wash time Care and Maintenance remaining on the display every five seconds until the weight has been determined. Do not try to open the door when the door locked indicator is on, nor open the The washing machine needs very little maintenance, but regular attention to a few small dispenser drawer during the wash programme.
We recommend that the filter be cleaned frequently, at least once a month. installed incorrectly or used incorrectly. If the problem persists after completing the recommended checks, please call Hoover Service (tel: 08705 400 600); they may be Maintenance wash able to assist you over the telephone.
Some programmes do take a long time (over 2.5 hours). Low water pressure can increase the length of the programme. If the following error codes are displayed, switch OFF the machine and contact Hoover Service: 0, 1, 4, 5, 7 and 8.
At Hoover, we aim to make appliances that are reliable and long lasting. However, During a power failure the water can be drained and the load can be removed from...
Page 20
A number of accessories can also be purchased using the above contact details. Brochures At Hoover, we produce a range of home appliances including vacuum cleaners, cooling appliances, washing machines, tumble dryers, dishwashers, cookers and built-in appliances. If you would like a brochure for any of our product ranges please call our head office...
Page 21
® Note: Hoover policy is one of continuous development and accordingly we reserve the right to alter specification without notice. The manufacturer declines all responsibility for errors printed in this instruction manual. Hoover Ltd. Pentrebach, Merthyr Tydfil, Mid Glamorgan, CF48 4TU...
Need help?
Do you have a question about the VISION HD ZD and is the answer not in the manual?
Questions and answers