Flexible Buttons - Toshiba Strata CS User Manual

Flexible Buttons

All flexible buttons must be programmed for your telephone using the Strata CS
Admin or Client utility and can vary for individual phones (see
Secondary extensions numbers can only be set from the Administrator.
Extension Buttons
Strata CS uses the following Directory Number Buttons to manage Call Appearances.
Table 2 Extension Button Definitions
Button
Extension Number
Secondary Extension
Number
Phantom Extension
Number
The naming convention for DKT assignments within Toshiba is Directory
Note
Numbers. You will see references to Primary (PDN) and Secondary Directory
Numbers (SDN) within the user Client graphical user interface. For clarity
and ease of understanding, the terms Extension Number and Secondary
Extension Number will be used in this document in lieu of PDN and SDN.
Strata CS Digital Telephone 02/06
Press to answer a call to the Extension Number. Each station can have
multiple extension buttons. Incoming calls ring the extension button(s) from
the top down. For example, station 100's extensions ring 100-4 first, then
100-3, 100-2, and 100-1 (see
An extension number of another station which appears on your station is
considered a secondary extension number. You can pick up an incoming
call to a secondary extension number. Ringing Delay options and Ringer
Tone options are available on a per-key basis.
An extension that appears on your phone but does not have an association
with another physical phone. A phantom extension can be used as an
additional separate extension on digital telephones. It can also be used as
a private number destination with its own private voicemail box.
Table 2
Definitions
Figure 3 on page 6).
The Grand Tour
Buttons
and Figure 3).
5