Advertisement
Advertisement
Table of Contents
Summary of Contents for AirSource 3000
- Page 1 Owner s Manual ’ AirSource 3000 Purification System ®...
-
Page 2: Important Safety Instructions
•THE WARRANTY WILL BE VOIDED IF YOU REPAIR THE UNIT YOURSELF. Contact AirSource Customer Support (1-866 - GREAT- AIR) for instructions on how to return the unit for repairs. THE WARRANTY WILL BE VOIDED IF YOU DO NOT REGISTER WITHIN 30 DAYS OF PURCHASE. -
Page 3: Three-Year Limited Warranty
Preliminary research of the effect of low amounts of residual ozone (less than .05 ppm) on birds does not indicate that it would be harmful to them. The AirSource 3000 has not been tested for its effect on infants, the elderly, or pets, and given the absence of available information, as a precaution, we recommend that the unit not be used in close proximity to them. -
Page 4: Getting Started
Warranty Card. Positioning The AirSource 3000 Purification System is designed to treat air in spaces at least 500 square feet, but not exceeding 3,000 square feet. The physical location of the unit can determine how effectively the unit purifies the air surrounding it. -
Page 5: Replacing Photohydroionization Module
If you intend to use the unit in an area exceeding 3,000 square feet in size or if you have rooms that are segregated, you should consider an additional AirSource 3000 unit. However, do NOT place more than one air treatment unit in the same room. -
Page 6: Product Overview
How Does Your AirSource 3000 ® The AirSource 3000 is an extremely effective indoor air purifying system. ® It works through a patented combination of technologies — Photohydroionization * and Electron Generation. Here’s how these two ™ technologies work: Photohydroionization * Module ™... -
Page 7: Purification System Work
Purification System Work? Electron Generator A unique dielectric chamber that generates an expanding negative electrostatic field. Positively charged particles that enter the field pick up negative charges until neutralized, which allows the force of gravity to take over and pull the particles out of the breathing space. -
Page 8: Troubleshooting The Unit
Troubleshooting the Unit Symptom Solution No power — fan, lamp, Check to see if the cord is plugged in and the unit and electron generator do is switched on. not function. Check to see that outlet is working. If the outlet is controlled by wall switch, make sure it’s on. Fan is not working.
Need help?
Do you have a question about the 3000 and is the answer not in the manual?
Questions and answers
I want to replace the bulb that is in the module How do you do it????
To replace the bulb in the AirSource 3000 module, follow these steps:
1. Switch the unit off.
2. Remove the old module by turning the screw counterclockwise and slowly backing it out until it is completely disengaged. Discard the old module.
3. Insert the new module into the unit and turn the screw clockwise until the module is flush with the outer wall. Do not over-tighten.
4. Switch the unit on. If the light does not come on, check the fit of the module and tighten the screw if necessary.
For a replacement Photohydroionization™ Module, contact your AirSource representative and use Item Code #55103.
This answer is automatically generated
Do you sell replacement module for Air Source 309, or where I can purchase? Please advise. Thanks you.
You can purchase a replacement module for the AirSource 3000 from Ubuy. The item is listed as "Air Source 3000 Genuine New OEM Replacement Module #55103."
This answer is automatically generated