Resetting The System - Cooper Security M-Series User Manual

Resetting the System

! ALERTS !
17:38 Wed 16 MAR
01 Faults. Press
'Ent' to view.
ALARM 0005
08:13:45 01/01
14
Resetting the system enables you to review
the alerts that have taken place and clears
the ALERTS message on the main screen. In
some cases, you may not be able to set
your alarm system until you have reset it.
Any user can silence the sounders and
review the message, but some alarms
may require an engineer or remote
reset code (page 15) to reset the
system.
The keypad sounder may emit a
warning chime every minute if the
system needs to be reset.
To reset your alarm system:
1. Enter your user code or present your
proximity tag when you see the ALERTS
screen.
2. The screen shown opposite shows how
many alert messages there are.
3. Press [ to view each message in turn
(see page 17 for details).
Pressing ] lets you to access the user
menus, but does not reset the system.