Page 2
Please enjoy your Sentria home care system to its fullest! This manual is written for use with both the Kirby ® Sentria ® home care system and the Kirby ® Sentria II™ home care system.
• Unplug the cord from the wall outlet and let the motor come to a complete stop before attempting any cleaning, service or changing accessories. • This appliance is provided with Double Insulation. It must be serviced by a factory authorized distributor or service center using genuine Kirby parts to maintain safety and to protect your warranty. • Keep all Kirby chemicals out of the reach of children. These chemicals may cause irritation or discomfort if swallowed or placed in the eyes. • Do not use flammable or combustible fluid in the Portable Sprayer.
Questions and Answers/Troubleshooting Other Fine Kirby® Cleaning Products Index Expanded Illustration of the Sentria model & Accessories If you have any questions regarding your purchase or the operation of your Kirby Home Care System, please contact your local authorized distributorship: ___________________________________________________ ___________________________________________________ ___________________________________________________ You may contact The Kirby Company’s Consumer Relations Department by:...
This Owner’s Manual was designed to be easy to read and follow. It has been organized in sections based on the various ways you may use your Kirby ® Sentria ® system. Within each section, simple step-by-step illustrations will help you easily visualize the steps required to properly operate your Sentria system and its many attachments and optional accessories.
With MicroAllergen Technology Reorder genuine Kirby Micron Magic HEPA filter bags from your local authorized Kirby Distributor. The Carpet and Rug Institute (CRI) has awarded the Kirby home care system its Gold Level seal of approval for meeting the organization's requirements for soil removal, dust containment and appearance retention.
Getting Started PART ONE This section outlines general information you will need as you begin using your Sentria ® system. It includes information on: Moving and Carrying Your System Using the Handle Tilt Latch Lock The Toe-Touch Control Adjust the Cleaning Height Using Tech Drive ®...
Page 8
Getting Started TOE-TOUCH CONTROL The Toe-Touch Control ⑧, ⑨ located over the front wheel, raises and lowers the front of the system, called the Power Nozzle. Step down on the Toe-Touch Control Bottom Pedal ⑨ to raise the front. ❏ ADJUST THE CLEANING HEIGHT Turn the unit on and select the proper cleaning height.
Always replace the Disposable Filter Bag when dirt reaches the FULL line on the Disposable Filter Bag. Failure to do so will affect performance. Use only genuine Kirby ® “Style F” Disposable Filter Bags. Before changing the Disposable Filter Bag, unplug the power cord from CAUTION: the wall outlet and be sure that the motor and fan have stopped.
Bag ① and close the zipper completely for maximum performance. NOTE: In order for the Filtration System to perform effectively, use only Kirby ® Micron Magic ® HEPA Filtration Bags. If the outside bag is torn or damaged, please replace immediately. ❏...
Page 11
Getting Started USING THE BELT LIFTER (cont) To use the Belt Lifter, you must first raise the Headlight Hood . ➤ Flip out the handle on the Belt Lifter . Use it to turn the Belt Lifter fully to the left (counter-clockwise) until it stops and the red arrows line up.
Upright & Portable Cleaner PART TWO Your Sentria ® home care system is extremely versatile. In this section, we will discuss the following: Upright Cord Management Using your Sentria System as an Upright Cleaner Using your Upright as a Straight Suction Cleaner Cleaning Hard-Surface Floors Using your Sentria System as a...
Upright & Portable Cleaner THE UPRIGHT CLEANER Before you begin vacuuming, it’s important to have the Power Nozzle adjusted to the proper height setting. This gives you the most efficient cleaning action. The proper height setting can be achieved by doing the following: ➤ Turn the Sentria ®...
Upright & Portable Cleaner To turn your Sentria ® system OFF, press the Toe-Touch Control Bottom Pedal ⑨ all the way down until nozzle is fully raised. Disengage Tech Drive power assist by stepping on the gray “N” side (marked “N” for Neutral) of the Tech Drive N/D Pedal ⑪. Turn the Sentria system OFF by pressing the Power Switch ⑬...
Upright & Portable Cleaner PORTABLE CLEANER SET-UP Besides being a remarkable Upright Cleaner, the Sentria ® system can easily be converted into a portable cleaner for mattresses and carpeted stairs. To convert your Sentria system to a Portable Cleaner, make sure the unit is turned OFF, unplugged, and the Tech Drive ®...
Page 16
Upright & Portable Cleaner CARPETED STAIRS Place your Sentria ® system on one of the carpeted steps, while supporting the rear. Turn the unit on after it is in place and make sure the Tech Drive ® pedal is in the Neutral position. Roll the cleaner back and forth so that the Brush Roll agitates the carpeting and loosens the dirt.
Canister Cleaner & Attachments PART THREE Your Kirby ® Sentria ® system comes with a wide variety of attachments for added versatility. In this section, we will discuss the following: Removing the Power Nozzle to Convert to a Canister Cleaner...
Canister Cleaner & Attachments At the connector end of the Attachment Hose, you will notice two hooks. Place the hooks over the ends of the Attaching Bar , then push the opening of the hose up against the Sentria ® system. ➤...
Canister Cleaner & Attachments SURFACE NOZZLE UNDER LOW FURNITURE/BARE FLOORS The Surface Nozzle should be used on bare floors or for surface cleaning carpets and under low furniture. Rubber wheels on the nozzle allow it to glide silently on the surface of hard floors without scratching and vacuum with maximum power.
Canister Cleaner & Attachments UTILITY TOOL Use to clean carpeting or the floors of cars. ❏ CONTROLLING AIRFLOW WITH THE SUCTION CONTROL GRIP Sometimes when using the attachments, vacuuming drapes or delicate lamp shades, for example, you might wish to control the amount of suction.
Page 21
Canister Cleaner & Attachments BLOWER SET-UP (cont) Raise the Headlight Hood and flip out the handle on the Belt Lifter ⑳. Use it to turn the Belt Lifter all the way to the left (counter-clockwise) until the red arrows line up. ➤ Unlock the Power Nozzle by turning the Accessory Lock all the way to the left (counter-clockwise).
Canister Cleaner & Attachments USING AS A BLOWER Your Sentria ® system may now be used as a blower. By attaching the Inflator/Deflator Tool to the Attachment Hose, you can inflate toys, air mattresses or any other low-pressure inflatable item up to 1 p.s.i.
Page 23
Canister Cleaner & Attachments USING THE PORTABLE SPRAYER Holding the Portable Sprayer horizontally, aim it toward a sheet of newspaper. Turn the Sentria ® system ON and squeeze the Portable Sprayer trigger, spraying your non-flammable solution onto the newspaper to check spray pattern. NOTE: If the Portable Sprayer must be tilted during usage, less solution should be used in the jar.
Canister Cleaner & Attachments CLEANING THE PORTABLE SPRAYER Immediately after use, empty the Portable Sprayer jar and wash with warm soapy water. ➤ The Portable Sprayer dip tube should also be removed and washed. (Make sure to reinstall it after cleaning.) ➤ The spray opening on the front of the Sprayer also pulls out so that the inside of the Sprayer and the nozzle jet can be cleaned.
Page 25
PORTABLE SHAMPOOER SET-UP (cont) Remove the jar from the Portable Sprayer and fill the jar about ¾ full with Kirby ® Carpet Shampoo mixture (Mix according to the instructions on the bottle.) USE ONLY KIRBY CARPET SHAMPOO for best results. ➤...
Optional Accessories PART FOUR Optional Kirby ® Accessories greatly enhance the usefulness of your Sentria ® system. In this section, we will discuss the following: Using the Carpet Shampoo System Using the Floor Care System Using the Turbo Accessory System...
Page 27
Holding the Shampoo Tank level, fill it to the full line with warm water (not hot). Using the large cup from the top of the tank, pour three cupfuls of Kirby Carpet Shampoo into the Shampoo Tank. Do not use more, ®...
Page 28
Optional Accessories CARPET SHAMPOO SYSTEM SET-UP (cont) Taking care to avoid spilling liquid on the Sentria ® system or the floor, place the opening in the bottom front of the Shampoo Tank over the Air Exhaust Port on the unit. Angle the Shampoo Tank outward from the unit until the arrows line up.
Page 29
Some moisture will accumulate in the front of the tray. Once the carpet is thoroughly dry, vacuum with the Kirby ® Upright. ❏ CLEANING THE CARPET SHAMPOO SYSTEM Push the Toe-Touch Control Bottom Pedal ⑨ all the way down to raise the nozzle and tray, then turn the Sentria system OFF and unplug it.
Page 30
Optional Accessories CLEANING THE CARPET SHAMPOO SYSTEM (cont) Turn the Accessory Lock to the left (counter-clockwise). The Carpet Shampoo System Nozzle/Tray Assembly will tip forward. Lift the Nozzle/Tray Assembly off the Sentria ® system and carry it to the sink. ➤ Remove the hose from the tray and rinse.
Page 31
Optional Accessories CLEANING THE CARPET SHAMPOO SYSTEM (cont) To remove the Shampoo Tank from the Air Exhaust Port , rotate it away from the Sentria ® system as far as it will go, then lift it upwards. ➤ Remove and clean the Suds Screen Cap, Cup and Sponge Filter. Rinse out the Shampoo Tank with cold water and replace the Screen Cap, Cup and Sponge Filter.
Page 32
The brush will snap out and the belt can be replaced. Be certain the belt is placed in the center of the brush. NOTE: Use only approved Kirby ® belts. ➤ Align the metal ends of the brush with the slots on the tray and push the brush in until it snaps into place.
Optional Accessories USING THE KIRBY MIRACLE WAXER ® FLOOR POLISHER To assemble the roller waxer applicator, attach the top half of the roller waxer handle to the bottom half (if not already done). Adjust the upper half until the spring-loaded pin in the lower half is seated in the hole near the bottom of the upper half.
Page 34
‘‘Floor Buffer Set-Up.” However, buff immediately, avoiding any drying time. 3. For best results, apply a very thin coat of Kirby Once you have completed the steps above, the floor Miracle Wax using the roller applicator. It is not...
Optional Accessories FLOOR BUFFER SET-UP Your Sentria ® system can be used as an effective floor buffer for wood or tile floors. To use the Floor Buffer, you must first insert the Buffer Brush into the Floor Buffer Nozzle. Center the belt of the Buffer Brush in the middle area between the tufts of the brush.
Page 36
Optional Accessories FLOOR BUFFER SET-UP (cont) To engage the drive belt and Buffer Brush, use the handle to turn the Belt Lifter all the way to the right (clockwise) until the green arrows line up. Lower the Headlight Hood . ➤ DO NOT USE Tech Drive ®...
See page 13 for set-up and use of the Hard Floor Pad. ❏ USING THE CARPET FLUFFER Your Kirby ® Floor Buffer can also be used as a Carpet Fluffer to reset the nap on a matted-down carpet. Before fluffing the carpet, raise the nozzle all the way up by pushing the Toe-Touch Control Bottom Pedal ⑨...
Optional Accessories TURBO ACCESSORY SET-UP The Turbo Accessory System can be used for a wide variety of household jobs. It’s a sander, a buffing unit and a scouring unit. TURBO-SANDING To set up the Turbo Accessory System as a sander, unsnap the Sander Dust Shroud at the rear of the tool and lift off.
Page 39
Optional Accessories TURBO-SANDING SET-UP (cont) Insert the Attachment Hose into the end of the Turbo Accessory. Grip the Sander at the front and rear and turn the Sentria ® system ON. Then press the ON button on the top of the Sander. While applying light pressure, move it over the surface slowly.
Optional Accessories USING THE ZIPPBRUSH When attached to the Attachment Hose, the Zippbrush can be used for a wide variety of cleaning surfaces, including upholstery, and carpeted steps. It can be used to clean automotive interiors. For optimum results, do not press down heavily on the Zippbrush. Allow the brush to rotate at maximum speed by gently moving it side to side on the surface being cleaned.
Operating/Maintenance Tips PART FIVE Your Kirby ® Sentria ® system is a highly sophisticated home main- tenance system. As with most modern appliances, it requires a modest degree of routine maintenance to keep it operating efficiently. This section of the Owner’s Manual presents tips on operating and maintaining your Sentria system.
Page 42
Operating/Maintenance Tips CHANGING THE POWER NOZZLE BELT (cont) Slide off the old belt and replace with a new one. ➤ Make sure the Brush Roll Bristle Height Adjustment setting (1, 2, or 3) is the same on both ends as when the brush was removed.
Operating/Maintenance Tips ADJUSTING THE BRUSH ROLL HEIGHT FOR MAXIMUM CLEANABILITY The Brush Roll bristles wear away after long periods of use. This reduces cleaning efficiency. However, the ends of the Brush Roll are adjustable, so you can extend the bristles, allowing the brush to work like new again. ➤ Remove the Power Nozzle from the Sentria system.
Sentria ® system. ❏ WHEEL WEAR/ REPLACEMENT Kirby ® wheels are made with a pliable tread that is designed to prevent carpet wear and prevent damage to non-carpeted floors. After extended periods of use, the tread on the wheels will wear out and the wheels will need to be replaced.
Servicing a double-insulated appliance requires extreme care and knowledge of the system and should be done only by qualified service personnel. Replacement parts for this double-insulated Sentria ® model must be genuine Kirby ® parts for maintenance of safety and protection of warranty.
Page 46
Operating/Maintenance Tips Questions and Answers/Troubleshooting Sentria ® I SMELL BURNING RUBBER WHEN I USE MY SYSTEM WHAT SHOULD I DO? 1. Check to see if the Brush Roll is turning when the Sentria system is running. If not, then the Brush Roll may be stalled due to threads around the ends. Remove Brush Roll and make sure it rotates freely at both ends.
Page 47
Operating/Maintenance Tips Questions and Answers/Troubleshooting HOW DO I VACUUM MY UPHOLSTERED FURNITURE? 1.Convert to a canister. (See page 16.) (Do not use Power Nozzle on furniture.) 2. Use the Attachment Hose with or without the following attachments: • the Upholstery Nozzle. • the Crevice Tool with the brush removed. (Use in between seat cushions and in crevices.) • the optional Zippbrush.
Page 48
1. You may also purchase Odorific ® II, an odorizer that leaves your room smelling clean and fresh. Place a few drops on a cottonball and toss it in the Outer Permanent Bag. For a list of other fine Kirby ® products, (see page 48 and 49.)
Highly effective formula gives you a “head start” on shampooing. Just spray on heavily-soiled walkways, entryways and traffic patterns a few minutes prior to shampooing. STAIN REMOVER PRODUCT FAMILY Kirby Foam Effective on heavily-soiled carpeted stairs and other hard-to-reach places. Just spray and blot. Great for auto and home floor mats! Pet Stain &...
Page 50
Splitsecond 2 ® Automotive Vacuum The twelve-volt automotive version of the popular Splitsecond portable hand vacuum plugs into a standard cigarette lighter. Perfect for cars, boats, campers and recreational vehicles. Contact Your Factory Authorized Location for these and other Kirby Home Care Products.
Suction Control Grip ..19 Bag Release Button ..14 Kirby ® Carpet Shampoo ..26,48 Surface Nozzle ....18 Bag Support Strap .
Page 52
DECLARATION OF CONFORMITY We, Kirby, declare under our sole responsibility that, where applicable, the Kirby Model G10E Vacuum Cleaner is in conformity with the following standards or standardized documents. IEC 60335-1 (EN 60335-1), IEC 60335-2-2 (EN 60335-2-2), EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 50366...
Sentria ® Part Outer Permanent Bag Bag Latch Tab Disposable Filter Bag Bag Support Strap Top Adaptor Mini Em-Tor ® Collector Performance Indicator Light Toe-Touch Control Upper Pedal Toe-Touch Control Bottom Pedal Handle Tilt Latch Tech Drive Power Assist Neutral Pedal Tech Drive Power Assist Drive Pedal Power Switch Handle Release Button...
Aids in cleaning of carpeted stairs and mattress cleaning. Portable Shampooer Cap Attach onto portable sprayer with unit in blower mode to apply Kirby ® Carpet Shampoo for spot cleaning. Utility Tool Clean the floors of cars. Inflator/Deflator Tool...
Page 57
Your local authorized distributorship is available to answer any questions regarding Sentria ® your purchase or the operation of your Home Care System. The Kirby Company also has Consumer Relations Specialists available to answer any questions you may have about the Home Care System or provide you Sentria with the name of your nearest Kirby distributor.
Page 58
For assistance, contact your local Authorized Distributor. The Kirby Company, a division of The Scott Fetzer Co., 1920 West 114 Street, Cleveland, OH 44102, U.S.A. U.S.A./Canada Parts and Supplies: 1-800-437-7170 imd@kirbywhq.com Consumer Relations: 1-800-494-8586 consumer@kirbywhq.com 1800 781 556 Australia Europe...
Need help?
Do you have a question about the Sentria II and is the answer not in the manual?
Questions and answers