Shift; Logout; Recall; Answer - NEC D-Term IP-32 User Manual

Shift

The Shift key allows you to save an additional 8 speed dial keys. For more information on speed
dial keys, see page 8.

Logout

The Logout key allows you to log out of your IP phone and disconnect it from the network. You
will not be able to make or receive calls while you are logged out. This feature is not widely
used at Vanderbilt.
IF PROMPTED TO LOGIN TO YOUR D-TERM IP PHONE
Enter your 5-digit extension as the login code and press Set. Enter your 5-digit extension as the
password and press OK. If the login code is accepted, the display will indicate "Connecting...
(VLAN)" and eventually change to normal idle status.
TO LOG OUT OF YOUR D-TERM IP PHONE
Press the Logout key. Your display will indicate "LOGOUT?" and the LED will slowly flash red.
Press the Logout key again to log out. Your display will indicate "Connecting... (VLAN)" as it
disconnects from the network.

Recall

Pressing the Recall key will immediately disconnect your current call and get a new dial tone.

Answer

This feature will allow you to automatically answer your secondary lines without selecting them
first.
TO ACTIVATE ANSWER MODE
Press the Feature key, then press the Answer key. The LED light on this key will illuminate.
TO DEACTIVATE ANSWER MODE
Press the Feature key, then press the Answer key. The LED light will go off.

Redial

This feature saves a history of previously dialed numbers, allowing you to scroll through the list
and instantly redial. To do so, press the Redial key repeatedly to scroll through the list. Once
the desired number is displayed, press the * key to dial the desired number.
11