Table of Contents
Advertisement
OPERATING INSTRUCTIONS
The functions of the buttons located on the bottom
of the monitor change as shown below:
PROGRAM UP/DOWN button
(
SELECT button)
INPUT SELECT button
(OK button)
MENU button
• ( ) indicates the function while the MENU is displayed on the screen.
Input Switching
•
Input can be switched by pressing the AV1, AV2, AV3,
AV4, RGB1 or RGB2 buttons of the remote control. And
the way to return to a TV channel is as follows:
• Pressing INPUT SELECT button at RGB2 input screen.
• Pressing some PROGRAM SELECT buttons and select a TV
channel.
• Pressing PROGRAM UP/DOWN buttons at the screen without
OSD(On-screen display).
Input can be switched in the sequence of TV ➔ AV1 ➔
•
AV2 ➔ AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the
INPUT SELECT button of the monitor or the remote
control.
TV
AV1
RGB2
RGB1
40
PROGRAM UP/DOWN
SUB-POWER button
VOLUME UP/DOWN
buttons(
ADJUST buttons)
AV2
AV3
AV4
POWER ON/OFF
D / N
button
i +
INPUT SELECT
button
MENU
P+
buttons
-
OK
D V D
1
2
4
5
7
8
0
RGB/VIDEO
AV1
AV2
buttons
Size Switching
Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the
screen.
• During TV mode
4:3
Panoramic
Full
Cinema
Zoom
• [Auto] is the mode using WSS (Wide Screen Signals) which
identify the picture format movies and programs are broadcast in.
Various broadcast stations now transmit WSS. It can be detected
and the monitor automatically switch to the correct format.
However, some broadcasters do not transmit WSS, so this
monitor will not recognize which format is being transmitted.
Therefore, Default Zoom setting in the Function Menu is used to
choose when a WSS has not been sent or has not been detected.
I / II
2-4-12
A / B
+
P-
VOLUME
UP/DOWN buttons
FREEZE
MUTE button
ZOOM
ZOOM button
3
6
PROGRAM SELECT
buttons
9
AV3
AV4
RGB1
RGB2
Advertisement
Table of Contents
