Page 1
Please read this ma nual ca ref ull y before attempting installation a nd onli ne Acti vation. Pictures a re for i ndication and ill ustratio n purposes onl y. User Manual for GT02 GPS VEHICLE TRACKER 1 / 6...
Weight: 45g 3. Function setting Remarks: If you take GT02 to your country, please change the APN parameter of the device (through sending SMS). You can ask your GSM operator for APN. The first SMS Command: APN,666666,APN name# For example, if your GSM provider’s name is ORANGE and its APN as below:...
After you send the above 2 SMS from your cell phone to your GT02, it will connect with our server. 3.1 Location search methods: GPRS background/ SMS 3.2 We based service platform: www.gootrack.net 3.3 Vehicle location information auto-uploading The GPRS time sending interval can be set to between 10s and 18000s. The factory default setting for location updates is set at 10s.
Page 4
Please follow the following procedures to install your GT02. During installation, there should be no power to the device. 6.2 Installing SIM card: each GT02 needs to insert a GSM SIM card. The SIM card used should be enabled for GPRS.
NOTE: 1) To prevent theft of the GT02, the device should be installed as covertly as possible. 2) Avoid placing the GT02 close to higher power electrical devices, such as reversing radar, anti-theft device or other vehicle communication equipment;...
The device will power off after power is disconnected. 9. Side key function At normal-work indication status, press the side key, all the three LEDs will extinguish and then the GT02 will enter covert working mode. Press the key again, the three LEDs will go back to normal-work indication status.
Need help?
Do you have a question about the GT02 and is the answer not in the manual?
Questions and answers