Little sea-ox household electric water heater (2 pages)
Summary of Contents for Haier SILVER SEA-OX FCD-JTHMG100- E
Page 1
Group Qingdao Economic and TechnologicalDevelopment District Haier Water Heater Co., Ltd. Add:Haier Garden, Qianwangang Road, Economic Development Zone, Qingdao, P. R. China Silver Sea-ox Haier Household Electric Water Heater Please read this manual before usage Rev. 01 Specific Number:0040501638 Retain it for future regerence...
Pre-safe Expert This mark is the designation for Pre-Safe Expert of Haier Water Heater Company, which indicates use of the company's patented technology inside the product. It ensures you a safe bath while monitoring whether your house ground wire is live or not all the time. If this mark is lighted on, it indicates your house ground wire has come live (poor grounding and live).
Please retain it for future reference. The international star service of Haier Group will always accompany you. No matter what kind of problems you meet in usage, please contact with the local after -sales service agent.
Features 2. Safe: High-quality imported heat-resistant stainless steel heating element, corrosion resistant and more reliable. Fuzzy control with over-temperature protection, tank liner over-pressure protection and current leakage protection. Safe Care patented design together with the function of monitoring and displaying of live ground wire has become a real safeguard for family safety.
During use, the displayed value is still water temperature at detection point instead of outlet temperature. Please do not directly turn on hot water. The product adopts Haier Safe Care patented technology. In normal installation, even in severe case that ground wire is live due to wrong connection, the product and efficiently ensure your safety.
The tubes and pipes fitted on the product are inseparable parts of the technology, and shall not be removed by yourself. Otherwise, Haier shall not be liable for any damages or injuries caused due to resulted potential risks.
Operation Instructions 2. Temperature Setting With the machine powered on (with no any digits flashing on the display), press button to enter temperature setting status with the temperature digits rapidly flashing. Temperature can be changed between 35 - 75 with an increment 1 heating mode, you can directly press button to adjust temperature setting value.
Make four holes 12mm, 65 mm deep in the wall with an impact drill as shown in Fig. 2. Insert and fixexpansion hooks and expansion bolts in corresponding wall holes. Lift the water heater. Insert wall rack onto the hooks and bolts.