Kenmore 790.75741991 Installation Instructions Manual

For Models with 2 Standard and 2 Large Sealed Surface Burners
INSTALLATION AND SERVICE MUST BE PERFORMED BY
A QUALIFIED INSTALLER.
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS CONVERSION KIT MUST BE INSTALLED BY A QUALIFIED SERVICE TECHNICIAN
IN ACCORDANCE WITH THE MANUFACTURER'S INSTRUCTIONS AND ALLAPPLICABLE CODES AND
REQUIREM ENTS OF TH E AUTHORITY HAVING JU RISDICTION. FAILURE TO FOLLOW INSTRUCTIONS
MAY RESULT IN FIRE, EXPLOSION OR PRODUCTION OF CARBON MONOXIDE CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. THE QUALIFIED SERVICE AGENCY IS RESPONSIBLE
FOR THE PROPER INSTALLATION OF THIS KIT. THE INSTALLATION IS NOT PROPER AND COMPLETE
UNTIL THE OPERATION OF THE CONVERTED APPLIANCE IS CHECKED AS SPECIFIED IN THE
MANUFACTURER'S INSTRUCTIONS SUPPLIED WITH THE KIT.
BEFORE PROCEEDING WITH THE CONVERSION, SHUT OFF THE GAS SUPPLY BEFORE
DISCONNECTING ELECTRICAL POWER TO THE RANGE. BE SURE BOTH POWER SUPPLIES ARE OFF
BEFORE INSTALLING THE CONVERSION KIT. FAILURE TO DO SO COULD CAUSE SERIOUS BODILY
INJURY.
This kit contains the following:
Quantity Description Part Number
1
2
2
2
2
Surface Burner Orifice Marked 0.89 mm (7,500 BTU*) 316010802
Surface Burner Orifice Marked 1.00 mm (10,000 BTU*) Green 316010803
*For operation at elevations above 2000 ft., appliance rating shall be reduced at the rate of 4 percent for each
1000 ft. above sea level.
installation Instructions
Restrictor-Burner
Screw-Restrictor
Choke-Burner: Small (7,500 BTU) Surface Burners
Choke-Burner: Large (10,000 BTU) Surface Burners
316105826
316011600
316064200
316056700
316O863O0
Tools Required:
#1 Phillips Head Screwdriver (small)
5/8" Open End Wrench ___j w_mmm_
1/8" Wide Flat Blade Screwdriver
7mm Nutdriver
J
J
Espa_ol - P,_ginas 7-12
P/N 316105826 (0001)
1