Checking The Remaining Battery Power; Preventing Accidental Operation (Hold Function) - Yamaha POCKETRAK W24 Owner's Manual

Checking the remaining battery power

The battery indicator on the LCD screen indicates the
amount of remaining battery power as shown on the right.
When the battery power falls to a low level, the recorder
will display the message "LOW BATTERY!." At this time,
replace the battery with a new one.
Battery life (of an alkaline battery used for recording
to the internal memory)
PCM 96kHz, 24bit
PCM 44.1kHz, 16bit
MP3 64kbps
* The above estimate is based on the following assumptions: Recording/playback LED off, backlight off,
no recording monitoring, the ALC function on.
* Battery life varies depending on the type and manufacturer of the battery, storage conditions, usage,
ambient temperature, etc.
* The battery life of a nickel-metal hydride battery is about 70% of that of an alkaline battery. Also, the
voltage of a nickel-metal hydride battery is different from that of an alkaline battery. Therefore, the
remaining battery power for a nickel-metal hydride battery may not be displayed correctly.

Preventing accidental operation (Hold function)

• If you set the [HOLD] switch to [w HOLD],
"HOLD ON" appears on the display and the
control buttons will be disabled.
• Set the [HOLD] switch to its original position.
"HOLD OFF" appears on the display and the
Hold function is canceled.
About 19 hours
About 38 hours
About 56 hours
Remaining battery power
full
PCM 44.1K 16bit
A
0/0
L
R
0:00:00
Back side
[HOLD] switch
Set to [HOLD].
POCKETRAK W24 Owner's Manual
Starting Up
low
AUTO
H
0:00
11