Table of Contents
Advertisement
www.weslo.com
Model No. WLEX61110.3
Serial No.
USER’'S MANUAL
Write the serial number in the space
above for reference.
Serial Number Decal
(under frame)
QUESTIONS?
If you have questions, or if parts
are damaged or missing, DO NOT
CONTACT THE STORE; please
contact Customer Care.
IMPORTANT: Please register this
product (see the limited warranty
on the back cover of this manual)
before contacting Customer Care.
CALL TOLL-FREE:
1-866-699-3756
Mon.––Fri. 6 a.m.––6 p.m. MT
Sat. 8 a.m.––4 p.m. MT
ON THE WEB:
www.wesloservice.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Advertisement
Table of Contents
Related Manuals for Weslo Pursuit G 3.1 Bike
Summary of Contents for Weslo Pursuit G 3.1 Bike
- Page 1 Model No. WLEX61110.3 Serial No. USER’’S MANUAL Write the serial number in the space above for reference. Serial Number Decal (under frame) QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please contact Customer Care.
-
Page 2: Table Of Contents
Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. WESLO is a registered trademark of ICON IP, Inc. -
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your exercise bike before using your exercise bike. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. -
Page 4: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the WESLO ® PURSUIT G 3.1 manual. To help us assist you, note the product model exercise bike. The PURSUIT G 3.1 exercise bike number and serial number before contacting us. The provides a selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable. -
Page 5: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. -
Page 6: Assembly
ASSEMBLY •• Assembly requires two persons. •• In addition to the included tool(s), assembly requires the following tools: •• Place all parts in a cleared area and remove the one Phillips screwdriver packing materials. Do not dispose of the packing materials until you complete all assembly steps. - Page 7 3. Attach the Seat Frame (2) to the Frame (1) with four M8 x 20mm Screws (40). 4. Orient the Seat Carriage (4) and the Handlebar (5) as shown. Attach the Handlebar (5) to the Seat Carriage (4) with two M8 x 80mm Bolts (39) and two M8 Locknuts (35).
- Page 8 6. Insert the pin on the underside of the Seat Carriage (4) into the desired adjustment hole in the Seat Frame (2). Attach the Seat Carriage (4) to the Seat Frame (2) with the Carriage Plate (31) and two M8 x 55mm Screws (46).
- Page 9 8. Attach the Water Bottle Holder (13) to the Upright (3) with two M4 x 19mm Screws (27). 9. Have a second person hold the Upright (3) near the Frame (1). Avoid pinching Wire Tie the Reed Switch Locate the wire tie in the Upright (3). Tie the Wire (33) lower end of the wire tie to the Reed Switch Wire (33).
- Page 10 11. Untie and discard the wire tie on the Reed Switch Wire (33). Avoid pinching the wires While a second person holds the Console (8) near the Upright (3), connect the wire on the Console to the Reed Switch Wire (33). Insert the excess wire into the Upright (3) or into the Console (8).
-
Page 11: How To Use The Exercise Bike
HOW TO USE THE EXERCISE BIKE HOW TO ADJUST THE SEAT HOW TO LEVEL THE EXERCISE BIKE The seat can be adjusted forward or backward to the If the exercise bike position that is the most comfortable for you. rocks slightly on your floor during To adjust the seat, first remove the two indicated use, turn one or... -
Page 12: To Use The Console
FEATURES OF THE CONSOLE HOW TO USE THE CONSOLE The console offers a selection of features designed to 1. Turn on the console. make your workouts more effective. As you pedal, the console will provide continuous exercise feedback. To turn on the console, press the Display Mode button or begin pedaling. - Page 13 To select the To change the unit of measurement, first hold down speed, time, the Display Mode button for a few seconds. The distance, or newly selected unit of measurement will appear in calories mode the display. Repeat this action to change the unit of for continuous measurement again.
-
Page 14: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regu- Locate the Reed Switch (33). Rotate the Pulley (24) larly. Replace any worn parts immediately. until a Magnet (32) is aligned with the Reed Switch. Loosen, but do not remove, the indicated M4 x 19mm To clean the exercise bike, use a damp cloth and a Screw (27). - Page 15 HOW TO ADJUST THE DRIVE BELT Loosen the two M10 Flange Locknuts (37)——one on each side of the Eddy Mech (22). Then, tighten the two If the pedals slip while you are pedaling, even while the M6 Nuts (38) until the Drive Belt (not shown) is tight. resistance is adjusted to the highest setting, the drive When the Drive Belt is tight, tighten the M10 Locknuts.
-
Page 16: Fcc Information
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. -
Page 17: Exercise Guidelines
EXERCISE GUIDELINES Aerobic Exercise——If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian. -
Page 18: Part List
PART LIST Model No. WLEX61110.3 R0312C Key No. Qty. Description Key No. Qty. Description Frame Axle Seat Frame M4 x 19mm Screw Upright M10 x 65mm Bolt Seat Carriage Eyebolt Handlebar Tension Bracket Seat Carriage Plate Backrest Magnet Console Reed Switch/Wire Left Shield Clamp Right Shield... -
Page 19: Exploded Drawing
EXPLODED DRAWING Model No. WLEX61110.3 R0312C... -
Page 20: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: •• the model number and serial number of the product (see the front cover of this manual) ••...
Need help?
Do you have a question about the Pursuit G 3.1 Bike and is the answer not in the manual?
Questions and answers
Battery box, can it be replaced?
The manual does not mention replacing the battery box, only inserting and replacing the AA batteries.
This answer is automatically generated