Snmp - peplink 20 User Manual

USER MANUAL
Peplink Balance Series

20.6 SNMP

SNMP, or Simple Network Management Protocol, is an open standard that can be used to collect
information about the Peplink Balance unit.
SNMP configuration is located at: System > SNMP
SNMP Device
This field shows the router name defined in System > Admin Security.
Name
SNMP Port
This option specifies the port which SNMP used. The default port is set as 161.
SNMPv1
This option allows you to enable SNMP version 1.
SNMPv2
This option allows you to enable SNMP version 2.
SNMPv3
This option allows you to enable SNMP version 3.
To add a community for either SNMPv1 or SNMPv2, click the Add SNMP Community button in the
Community Name table, upon which the following screen is displayed:
Community Name
This setting specifies the SNMP Community Name.
Allowed Source
This setting specifies a subnet from which access to the SNMP server is allowed.
Subnet Address
Enter subnet address here (e.g. 192.168.1.0).
http://www.peplink.com
SNMP Settings
SNMP Community Settings
- 148 / 182 - Copyright © 2011 Peplink