Table of Contents
Advertisement
Installing/Removing the front bezel
When you power on/off the server, handle the DVD-ROM drive, or remove/install a hard disk drive
or CPU/IO module, remove the front bezel.
IMPORTANT:
The front bezel can only be removed by unlocking the lock with the
security key attached. bezel.
1.
Insert the product-accessory security
key into the key slot and push lightly.
Turn the key to the left to unlock.
2.
Hold the right edge of the front bezel
and pull it forward.
3.
Slide the front bezel to take the tab off
the frame and remove the front bezel.
When attaching the front bezel, hook the left tab into the server's frame first, then push forward
on the right side.
General Description 2-21
Advertisement
Table of Contents
Troubleshooting
