Launch Applications; Power Button; Suspend Mode - Motorola ET1 Quick Start Manual

Launch Applications

To launch an application:
Touch . The APPS screen displays.
1.
Touch an application icon to launch the application.
2.
8
Configure the ET1
To configure ET1 settings, touch
Enterprise Tablet User Guide and Integrator Guide for
information on configuring the ET1.

Power Button

Use the Power button to place the ET1 in suspend mode, battery
swap mode, to reset the ET1 or to power off the ET1.
All Apps icon

Suspend Mode

Press and release the Power button to place the ET1 in suspend
mode. In Suspend Mode the ET1 turns off the display and goes
into a low power state to conserve battery power.
Press and release the Power button to wake the ET1, and then
slide
Battery Swap Mode
Before replacing the battery, place the ET1 in Battery Swap
Mode. Press and hold the Power button until the dialog box
appears then touch Battery swap.
The Decode LED lights red. When the LED turns off, it is safe to
remove the battery.
up to unlock the screen.
Do not remove microSD card during Battery Swap
CAUTION
mode.
. Refer to the ET1