Related Manuals for Fire Burglary Instruments XL-3
Summary of Contents for Fire Burglary Instruments XL-3
- Page 1 _ _-. ‘, XL-3 - - - - SECURITY SYSTEM OWNERS MANUAL N9115 5/92 01992, FBX FIRE BURGLARY INSTRUMENTS, INC.
- Page 2 INTRODUCTION Congratulations on your decision to protect your home or business with the XL-3 series security system. You have chosen a reliable, state of the art securii system that is remarkably easy to operate. Your system has been professionally installed by your local security company who can explain the specifics of your system within your location.
-
Page 3: Table Of Contents
21. ZONE DIRECTORY 22. SET AUTO-ARM TIME 23. CHIME MODE 24. READ CLOCK TIME 25. READ AUTO-SET TIME 26. DOOR STRIKE COMMAND 27. INSTALLATION LAYOUT 28. SYSTEM TESTING FCC STATEMENT LIMITATIONS STATEMENT OWNERS INFORMATION NOTES SUMMARY WARRANTY XL-3 USER’S MANUAL Page 2... -
Page 4: Keypad Layout Xl4612Rm And Xl4612Sm
Fast Blink = Armed in INSTANT mode (exit/entry delay eliminated) Fast & Slow Blink = Armed in STAY-INSTANT mode 5) NUMERICAL KEYPAD operates in a similar manner to a calculator or telephone with the digits 0 - 9 and # clearly marked. XL-3 USER’S MANUAL Page 3... -
Page 5: Keypad Layout 7015 And 7005
The OFF-NORMAL installer programming mode is identified by a flashing READY (on LED models) and by the display “PROGRAM MODE’ on LCD keypads.The panel is disabled in this mode. Call for service if this condition persists. XL-3 USER’S MANUAL Page 4... -
Page 6: Keypad Conventions
Following receipt of the off-premise transmission from the control at the central station, several beeps are heard from the keypad as confirmation. If neither of these conditions occur, CALL FOR SERVICE. p’ ’ NOTE: The system can be armed without the backup battery connected., XL-3 USER’S MANUAL Page 5... - Page 7 Bypass the zone(s) not ready. Bypassing should only be performed if the zone cannot be made ready or intentionally will remain not ready. Zones that are bypassed are not protected when the system is armed. XL-3 USER’S MANUAL Page 6’...
-
Page 8: Disarming
/” /~ DISARMING ’ Disarming the security system will deactivate the system’s burglary function. This procedure can also be used to reset your system if you accidentally set off the system (example, o#ened a window while the system was armed, or excessive amount of smoke activated fire protection system). -
Page 9: Stay
STAY mode.) On the 7015 keypads the INSTANT indicator will be ON. The LCD keypad will contain the following message: loN:INSTANT Note: The INSTANT option will automatically be reset after the system is disarmed. XL-3 USER’S MANUAL Page 8... -
Page 10: Instant-Stay
If multiple zones are bypassed then more than one display will appears , Remember: Zones which are bypassed are not protected when the system is armed. Temporary users (i.e. babysitters) shall be shown the bypass procedure. XL-3 USER’S MANUAL Page Q... -
Page 11: Unbypass
Any error detected during the USER definition process will cause the keypad to beep rapidly four times. If an error is detected retry the entire command. Obvious codes like 1111 or 1234 should be avoided. XL-3 USER’S MANUAL Page 10... -
Page 12: User Deletion
30 is ambush code. 15. ARM-ONLY (MAID) CODE If selected by your installer, the user code number 29 can only arm the system. This allows a temporary worker to only arm the security system as they XL-3 USER’S MANUAL Page 11... - Page 13 Any error detected during the USER definition process will cause the keypad to beep rapidly four times. If an error is detected retry the entire command. Obvious codes like 1111 or 1234 should be avoided. XL-3 USER’S MANUAL Page 10...
- Page 14 USER DELETION Removal of users from the panel can be performed as follows; USER DELETION PROCEDURE: CODE [USER] [User number ] # Where: CODE is the depression of the CODE key. [USER] Master user code [User number ] Represents the user number being deleted (03-30). Note: Master users (User number 1 or number 2) cannot be deleted.
-
Page 15: Door Strike User Code
Consult your installer to determine whether your user code is necessary for setting the time. This feature is disabled in UL installations. ZONE DIRECTORY (# 4 ) To view a list of the zone descriptors from the 7005 keypad, enter: # 4 XL-3 USER’S MANUAL Page 12... -
Page 16: Set Auto-Arm Time
# 9 [USER] [door strike number] For example: activate door strike 3 (with user code of 2468) enter: # 9 2468 3 XL-3 USER’S MANUAL Page 13... - Page 17 Consult your installer to determine whether your user code is necessary for setting the time. This feature is disabled in UL installations. @!I. ZONE DIRECTORY (# 4 ) To view a list of the zone descriptors from the 7005 keypad, enter: # 4 XL-3 USER’S MANUAL Page 12...
-
Page 18: Chime Mode
If enabled by your installer a valid user can activate any. of the system door strikes through the following command: # 9 [USER] [door strike number] For example: activate door strike 3 (with user code of 2468) enter: # 9 2468 3 0 \ 1 XL-3 USER’S MANUAL Page 13... -
Page 19: Installation Layout
Everyone including neighbors should be familiar with the Fire and Burglary signals. In this installation the Fire Alarm signal is The Burglary Alarm signal is The fire alarm signal takes precedence over the burglar alarm signal. XL-3 USER’S MANUAL Page 14... -
Page 20: System Testing
The National Fire Protection Association publishes a standard for household fire warning equipment. N.F.P.A. #74. Further information can be obtained by contacting; NFPA Public Affairs Dept., Batterymarch Park, Quincy,MA 02269. If you have any further questions about the operation of your system, call your installer. XL-3 USER’S MANUAL Page 15... -
Page 21: Fcc Statement
The <ser may not under any circumstances (in or out of warranty) attempt any service or repairs on the system. lt must be returned to the factory or an authorized service agency for all repairs. XL-3 USER’S MANUAL P-e... - Page 22 Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as diagramed in their installation manual. Passive XL-3 USER’S MANUAL Page 17...
- Page 23 Users of alarm >ystems owe it to themselves and their loved ones to learn about these developments. XL-3 USER’S MANUAL Page 18...
-
Page 24: Owners Information
’ OWNERS INFORMATION PERSONAL ADDRESS: CITY, STATE, ZIP: TELEPHONE NUMBER: EMERGENCY NUMBERS CENTRAL STATION: FIRE DEPARTMENT: /’ POLICE DEPARTMENT: NEIGHBOR: GAS/ELECTRIC COMPANY: DOCTOR: HOSPITAL: EMERGENCY: SERVICE INFORMATION ALARM INSTALLING COMPANY: XL-3 USER’S MANUAL Page 19... -
Page 25: Notes
DISPLAY AUTO-ARM TIME (‘) #8 DOOR STRIKE #9 [USER] [TRIGGER NUMBER] KEYPADS ONLY NOTE: The time needs to be set if all of the LEDS on the LED based keypads blink rapidly every 30 seconds. XL-3 USER’S MANUAL Page 22... -
Page 26: Warranty
FIRE BURGLARY INSTRUMENTS, INC. ONE YEAR UMlTED WARRANTY Fire Burglary Instruments, Inc., a subsidiary of Pittway Corporation, its divisions, subsidiaries and affiliates (“Seller”), warrants its security equipment (“the product”) to be free from defects in materials and workmanship one year from the date of original purchase, under normal use and service.
Need help?
Do you have a question about the XL-3 and is the answer not in the manual?
Questions and answers