Page 1
CLASSÉ AUDIO CA-300 POWER AMPLIFIER CA-300 OWNER'S MANUAL...
Page 2
CLASSÉ DESIGN PHILOSOPHY 1. REPEATED LISTENING DESIGN SESSIONS: Fine tuning of sound by exchanging and mixing of parts (transistors, capacitors, wiring, PCB boards etc.), and adjusting many specific operating voltages within proper engineering ranges, producing an overall sonic recipe giving the most natural harmonic realism of music typical of instruments in a live performance.
Please report any damage or missing parts to your dealer as soon as possible. Place the CA-300 at or near its final set-up position, allowing 8 inches at the rear for tightening the speaker output connectors. For optimum sonic performance, the optional CLASSÉ...
GENERAL CONNECTIONS A.C. LINE Insert the linecord into the A.C. receptacle on the rear of the unit. CAUTION: SAFETY INSTRUCTIONS DISCONNECT AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE GROUND” OR DEFEATING THE GROUND ON A 3-PRONG LINECORD MAY CREATE A SHOCK HAZARD.
Page 6
The MONO "Input" is the "left channel input", as marked. The unused right channel input is automatically disconnected. MONO output connections are marked below the connectors. Repeat the above MONO settings and connections on the second CA-300 to be used for the other channel.
CONNECTIONS FOR REGULAR OR BALANCED INPUTS: The CLASSÉ CA-300 power amplifier is equipped with both regular and balanced inputs. Either one may be used . The balanced inputs must be SEPARATELY BUT NOT SIMULTANEOUSLY connected to a preamplifier which has balanced main outputs, and balanced interconnects with "XLR"...
PROTECTION CIRCUIT The Classé CA-300 is equipped with rail fuses to protect the output drivers (GDB8, 8 amp fast-blow) and mosfet fuses to protect the mosfets (2AG 1/2PT, 1/2 amp fast-blow), which are used as pre-drivers for the output stage of the amplifier. In the event that a short circuit or other problems would occur at the output of the amplifier, one or more of these fuses may blow in an attempt to protect the amplifier.
CLASSÉ CA-300 ULTRA HIGH CURRENT STEREO/MONO POWER AMPLIFIER FEATURES SPECIFICATIONS SHEET CA-300 FEATURES: Newly developed special Classé "UHC TRANSFER" power supply section. Current capacity increased 50% above standard units. Magnetic flux controlled transformer cover in a brushed and anodized finish.
Page 13
Notice to all Classé Product owners: Thank your purchase Classé Audio component. All of us at Classé have taken extreme care to ensure that your purchase will become a prized investment. proud inform that Classé Audio components have been officially approved European Community CE mark.
Page 14
CLASSÉ CA-300 LIMITED FACTORY WARRANTY (North America only). IMPORTANT: Warranty registration, and a copy of the “Authorized Dealer Bill of Sale” must be received at the Classé Audio factory (address: pages 12) within thirty (30) days of purchase by the original retail purchaser in order to validate these warranty.
Page 15
CLASSÉ AUDIO INC. SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM OR RELATING TO THE SET-UP, OPERATION, FAILURE, TROUBLESHOOTING, OR REPAIR OF THE AMPLIFIER AND/OR ANY OTHER EQUIPMENT USED THEREWITH. THIS WARRANTY, ALL CLAIMS MADE IN VIRTUE HEREOF, AND ALL ISSUES RELATING TO ANY SUCH CLAIM SHALL BE GOVERNED BY THE LAWS OF THE PROVINCE OF QUÉBEC.
Page 16
(30) days of purchase. This will allow us to provide expedient service, information regarding updates and new products, and validate the Classé warranty. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ CA-300 SERIAL NUMBER______________________________________________________ PURCHASE DATE____________________________________________________________ AUTHORIZED DEALER________________________________________________________ PURCHASER'S NAME_________________________________________________________ STREET ADDRESS____________________________________________________________ CITY________________________________STATE/PROV.____________________________...
Need help?
Do you have a question about the CA-300 and is the answer not in the manual?
Questions and answers