Hex Dump Print - Seiko DPU-414 User Manual

2.7 HEX Dump Print

Data input from the computer is printed in hexadecimal codes and in
characters to allow you to check if data has been input correctly from the
computer.
Turn off the power.
Turn the power on while pressing the Paper feed switch.
Push the On-line switch when the OFFLINE lamp lights (this can be
done even if the test print has started).
The printer enters HEX dump mode indicated by the printing of
"[HEX DUMP MODE]".
Start inputting data. When 16 bytes or more of data have been input,
the data is printed as shown below:
Print sample
[HEX DUMP MODE]
00000000 00 01 02 03 04 05 06 07 08 09 OA OB OC OD OE OF ................
00000010 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F ................
00000020 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F !" # ＄% &' ()*+,-./
00000030 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 0123456789;:<=>?
Number
of input
code (Hex.)
Turn the power off to exit HEX dump mode.
HINT
• If you switch the printer to OFFLINE when there is less than 16
bytes per line, the printer goes to OFFLINE after a print-dump.
HEX DUMP MODE is reinitiated when the printer is put in ONLINE
mode.
• The ONLINE lamp blinks when there is still data in the buffer
memory in OFFLINE mode.
Character code (Hex.)
- 23 -
Corresponding
(characters)