NEC Express5800 Series User Manual page 21

– Monitor System Hangs - To enable the shutdown hang monitoring function by Watch-
dog timer, check the box.
– Timeout - Specify the Watch-dog timer timeout.
– Action at timeout - Specify the action at timeout.
– Action after timeout - Specify the action after timeout.
From the SAF-TE tab you can set the following information:
Sample Interval ⎯ SAF-TE monitoring cycle. The range is 1 to 3600 seconds. It's for
monitoring temperature, power units, or chassis covers on a SAF-TE instrumented system.
This function is automatically enabled only on a SAF-TE instrumented system.
Using the NEC ESMPRO Agent 17