Folding Instructions - Fitness Quest AB LOUNGE XL Owner's Manual

Hide thumbs

Table of Contents

The Ab Lounge

XL unit has been designed to fold for convenient travel and storage.

The Locking Arm Mechanism is removable by hand, no special tools required. For maximum

effectiveness and safety, always review these instructions prior to folding the unit.

Folding the Ab Lounge

a) Lay the unit on its right side as shown. Unhook the Short Band from the

Front Frame and the Long Band from the Rear Frame. Leave both Bands

connected to the Seat Support Frame for storage.

b) Pull the Back toward the Seat until it aligns with the Front Frame.

c) Unhook the Locking Arm Mechanism by pushing down on the button and

sliding it back and unhooking the Left Rear Frames (reverse assembly

Step 2).

d) Rotate the Locking Arm towards the Front Frame.

e) Grasp the Front Frame with one hand and the Rear Frame with the other

hand and slowly pull them together.

IMPORTANT: Place hands on Caution Labels when folding,

and be careful not to pinch your fingers between the

Front and Rear Frames.

f) For your unit to store flat you must fold the Handlebars in. To do this,

loosen the Handlebar Knobs and turn Handlebars inward toward the unit

and tighten Knobs to keep in place.

IMPORTANT: Before using your unit, be sure Handlebars are back in

correct position and the Knobs are securely tightened.

LOCATED ON BOTH

SIDES OF FRAME

CAUTION

LABEL

X15901-1

Front Frame