Table of Contents
Advertisement
Enable transmit DCS:
Enable stopwatch:
Software programming of the Wouxun radios enables additional features not available through manual keypad strokes or menus. These features may
include: mode switch password, reset password, welcome message, priority scan channel, set scanned channels, DTMF options and frequency range
unlocks. See the software help files for more information:
Wouxun software*:
Commander software:
Chirp Apple software:
Open Wouxun Linux/Unix software:
Unlocking software (at own risk):
The majority of user issues with radio software are related to an incorrect port (or device name) setting for the computer-radio interface cable. Linux
users must also ensure they are members of the uucp group.
Unlocking software requires care or you may brick the radio. Save all factory settings first by doing a "Program, Read from Radio, File, Save". If you
do an unlock the TX range must match the RX range. Also be aware that the internal filters and the antenna are designed for a limited frequency
range.
For wire cloning between similar radios see the Wouxun manual.
(* Wouxun software also works in Linux under Wine (
(DCS is rarely used in amateur radio)
MENU 1 8 MENU ▼ to select D023N through D754N digital coded squelch code for transmit , MENU EXIT
(DCS is rarely used in amateur radio)
MENU 2 5 MENU ▼ to select either OFF or ON , MENU EXIT
(when enabled start stopwatch by short press of
http://www.wouxun.com/DownView.asp?ID=164&SortID=12
http://www.kc8unj.com/kguv.html
http://chirp.danplanet.com/
http://owx.chmurka.net/?p=docs
http://mods.dk
http://www.winehq.org/
#
, press any key to pause, short press of
10 Software
) but the Commander software can be problematic with Wine).
16
#
again to restart.)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KG-UVD1P and is the answer not in the manual?
Questions and answers