Related Manuals for Snooper S2 neo
Summary of Contents for Snooper S2 neo
- Page 1 USER MANUAL Drive Safely with a Snooper GO TO CONTENTS system...
-
Page 2: Table Of Contents
19 Service under Warranty IMPORTANT - READ FIRST - IMPORTANT Your Snooper S2 comes with a database of cameras pre-loaded. However you must register your S2 to receive an unlock code before you are able to use the device. Please note that the database on the device will have been downloaded at the time of production so may not be 100% accurate at the time of purchase. -
Page 3: Introduction
S2 neo GPS location device. Utilising the very latest Global Positioning Satellite (GPS) technology, Snooper have created the S2 neo which has been specially designed to help you drive safely within the confines of today’s speed limits, by alerting you... -
Page 4: Components
Components S2 NEO The following components come as standard with your Snooper S2 NEO:- 1 x S2 system 1 x Windscreen suction cup bracket 2 x Hook & loop fastener 1 x Coiled power lead with cigarette lighter socket adaptor... -
Page 5: Features
Features 1 Mute/Dim Button 6 Bracket Mounting Slot 2 Memory/Delete Button 7 12v Power Input Socket 3 LED Display 8 USB Socket 4 360 Laser Prism 9 Power On/Off & Volume Control 5 Rear Laser Sensor Return to Contents Page... - Page 6 IMPORTANT PLEASE READ BEFORE USING YOUR SNOOPER S2! Registering your Snooper S2 The database built into your Snooper S2 is populated with the latest database available during production. However you will need to register your S2 to receive a unique unlock code before you can use the device. Please note that the database may not be 100% accurate due to the time elapsed between production and you receiving your S2.
-
Page 7: Downloading
Please note that you will need to register your Snooper S2 before you can perform any downloads. Having problems? If you find you are having problems either installing the S2 download software or downloading your S2, please visit www.snooperneo.co.uk... -
Page 8: Installation S2
The most important aspects of this installation are ensuring that the Snooper S2 is positioned in such a way that it has a clear view of the sky whilst ensuring that the device is situated so that it does not interfere with the vehicles controls and does not jeopardise either the passengers or drivers safety. - Page 9 Installing your Snooper S2 using the Hook and Loop fastener The Snooper S2 can be installed anywhere on the dashboard as long as the built-in GPS antenna has a clear view of the sky and you can easily see the LED display and operate the controls safely.
- Page 10 Finally plug the smaller plug on one end of the power cable into the socket marked DC12V on the back off the S2 and plug the larger plug into the cigarette lighter socket of your vehicle. Your Snooper S2 is now ready for use. For further information please read the section on Power Connection on page 11.
-
Page 11: Power Connection
Power Connection Using the cigarette lighter socket The S2 comes with a power cable designed to plug into your vehicles cigarette lighter socket. Take the lead and plug the smaller end into the DC 12v input socket on the back of the S2 and the cigarette lighter adaptor in your vehicles cigarette lighter socket. - Page 12 Direct connecting/hard wiring your S2 neo You can power your Snooper S2 by wiring it directly to your vehicles 12v electrical system using the ’Hard Wire’ cable supplied as standard with your unit.
-
Page 13: Operating Instructions
Operating Instructions Starting Up After you have successfully installed your S2 it is time to perform the first start up. Firstly make sure your vehicle is parked in as open a space as possible, clear of tall trees and buildings so that the built-in GPS antenna has a clear view of the sky above. -
Page 14: Adjusting The Volume
4. Adding your own locations It is possible to add your own personal locations to your Snooper S2. To add a new location make sure you are stationary and parked in a safe, legal manner then press the ’MEM/DEL’... -
Page 15: Alert Patterns
Whilst travelling through a SPECs system however, your Snooper S2 will provide both an audible and visual alert 250m before each camera plus will alert every 5 seconds between them until you reach the last camera in the SPECs sequence. - Page 16 User Saved Co-ordinates. The S2 will automatically give you 300m advanced warning of any User Saved Co-ordinates in it’s memory. Please Note - Your Snooper S2 will give a visual warning only, if you are travelling below 10mph. Return to Contents Page...
-
Page 17: Troubleshooting
Check that the S2’s built-in GPS antenna has a clear view of the sky above. If this is the first time you have powered up your Snooper S2 please remember that the first ’cold’ start may take between 15-30 minutes to acquire sufficient satellites for operation. -
Page 18: Specifications
Hot Start - 15secs(Typ) At normal temperature Snooper Accessories & Price List The following accessories are available from your local Snooper dealer. For further details please contact our technical help line on 0870 787 0700. Remote GPS re-radiating extension antenna........£69.95 Coiled power lead with cigarette lighter adaptor........ -
Page 19: Service Under Warranty
Service Under Warranty 1 To obtain service during the two year warranty period, return your unit, postage paid by Special Delivery and in suitable packaging to: Performance Products Ltd, Cleaver House, Sarus Court, Manor Park, Runcorn, WA7 1UL Tel: 0870 787 0700 Fax: 0870 787 1700 2 Enclose the following information: (a) Your name, return address and description of the problem. - Page 20 PERFORMANCEPRODUCTS Cleaver House, Sarus Court, Stuart Road, Manor Park, Runcorn WA7 1UL Tel: 0870 78 70 700 Fax: 0870 78 71 700 www.performanceproducts.co.uk...