Table of Contents
Advertisement
• Formatting a SD card
Formatting a memory card erases all data stored on it, including the
protected ones. Removing the SD card during formatting may damage
the card.
1. Insert an SD card into the camera.
2. Turn on the camera.
3. Access the setup menu.
4. Press the
or
5. Press the
button to enter.
6. Press the
desired setting.
7. Press the
button.
8. Press the
desired setting.
9. Press the
button to confirm your choice.
IMPORTANT!
• SD cards formatted in another camera, computer or other devices may not work
properly. It is recommended to format SD cards with your a801 camera.
• Note that data deleted by formatting operation cannot be recovered. Make
sure you do not have any useful data currently stored on a memory card before
you format it.
button to select
or
button to select the
or
button to select the
(FORMAT).
Polaroid a801 Digital Camera User Guide
SETUP
Language
Date Stamp
LCD Brightness
Format
2/4
Format
Internal Memory
SD Card
Format
All Data will be deleted?
Cancel
OK
www.polaroid.com
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the a801 and is the answer not in the manual?
Questions and answers
My flash does not work even when the flash is enabled. The camera will not take a picture when the flash is enabled. It worked one time then never again.
If the flash on your Polaroid A801 camera does not work even when enabled, try the following steps:
1. Ensure the flash is not set to "Flash Off" mode.
2. Check that the battery has enough charge, as a low battery may prevent the flash from firing.
3. Make sure you are using the flash in still image mode, as flash modes do not work in other modes.
4. Ensure the flash is not blocked or covered by your fingers.
5. Restart the camera and try again.
If the issue persists, refer to the troubleshooting section of the user guide or contact customer support.
This answer is automatically generated