Advertisement
Quick Links
Subject to change
Document Ref:
FBJ-710/17567/PMR13/Issue 1/Mar 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com
Ferm Biscuit Jointer
FBJ-710
0210/22
USER'S MANUAL
Art.nr. 726750
Screwfix nr. 17569
Advertisement
Summary of Contents for Ferm-Omega Tools FBJ-710
- Page 1 Subject to change USER’S MANUAL Document Ref: FBJ-710/17567/PMR13/Issue 1/Mar 02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Biscuit Jointer FBJ-710 Art.nr. 726750 Screwfix nr. 17569 Ferm • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com...
-
Page 2: Safety Instructions
1 Allen wrench Fig. A 1 Dust collection bag 1 Instruction manual The FBJ-710 Biscuit Jointer is suitable for cutting grooves 1 Safety instructions for biscuit dowel joints in solid wood, plywood, chipbo- 1 Guarantee card ard, fibre board, plexiglass and artificial marble. - Page 3 Carefully read this manual before using the machine. Guard against electric shock Make sure that you know how the machine functions and This unit contains dangerous voltages. Use a RCD (resi- SPARE PARTS LIST how to operate it. Maintain the machine in accordance dual current device) to provide protection against elec- with the instructions to make sure it functions properly.
- Page 4 Connect a dust extraction device CHECKING THE MAXIMUM CUTTING Whenever there are facilities for fitting a dust or fume DEPTH extraction system, make sure it is connected and used. After changing/fitting a saw blade always check the maxi- mum cutting depth. Use recommended accessories Refer to illustration below.
- Page 5 GUARANTEE TO ADJUST THE CUTTING DEPTH ATTACHING THE DUST BAG/DUST The guarantee conditions can be found on the separately Referring to the illustration below. EXTRACTION enclosed guarantee card. Move the motor body backwards as far as it will go, Insert the dust bag with its adaptor into the nozzle on then turn the adjustment knob (7) to the required the right hand side of the jointer base.
- Page 6 If the blade seizes in the cut, switch off, unplug and Small workpieces MAINTENCE, CARE AND Have your tool repaired by an expert open the cut with a suitable tool before pulling the Place the machine on the workpiece; the side of the This appliance is manufactured in accordance with rele- REPAIR blade out –...
Need help?
Do you have a question about the FBJ-710 and is the answer not in the manual?
Questions and answers