Firewall - Ip Filtering - Acer 11b User Manual

Protocol
Comments
Apply Changes
Reset
Delete Selected
Delete All
Reset

3.3.9 Firewall - IP Filtering

Entries in this table are used to restrict certain types of data packets from your
local network to Internet through the Gateway. Use of such filters can be helpful
in securing or restricting your local network.
Screenshot – Firewall - IP Filtering
certain ports, fill in the range of start-port and end-port,
and the protocol, also put your comments on it.
The Protocol can be TCP, UDP or Both.
Comments let you know about whys to restrict data from
the ports.
Click the Apply Changes button to register the ports to
port filtering list.
Click the Reset button to abort change and recover the
previous configuration setting.
Click to delete the selected port range that will be
removed from the port-filtering list.
Click to delete all the registered entries from the
port-filtering list.
Click the Reset button to abort change and recover the
previous configuration setting.
21