Advertisement
14.4V CORDLESS HAMMER DRILL
PCC-1440
Name:
Address
Contact Telephone No.:
Fault Description:
Please complete this section before sending in your warranty certificate.
In order to deal with your enquiry as quickly and efficiently as possible, we ask you to send your
enquiry by email (technical@omegawolf.co.uk). Do not forget to include your name, address and a
daytime telephone number.
Alternatively, you can contact our service hot-line on the number given below.
Office hours are as follows:
Mon - Fri: 8 am - 6 pm, Sat: 10 am - 2 pm, Sun: 10 am - 4 pm
UK Helpline
Heltec Ltd.
Circuit Tech Ltd.
Units 1/9 Stanley Mill • Kirkebrok Road • Deane, Bolton Lancs, England • BL3 4JE
Service Center
0905-1460005 - £ 0,06 / min.
Ireland Helpline
Heltec Ltd.
Circuit Tech Ltd.
Units 1/9 Stanley Mill • Kirkebrok Road • Deane, Bolton Lancs, England • BL3 4JE
Service Center
1520-932626 - E 0,15 / min.
WEB SUPPORT
www.heltec.eu
Replacements or repairs under guarantee regulations are free of charge.
CORDLESS HAMMER DRILL
After Sales Support
Now you have purchased a Power Craft
product you can rest assured in the
knowledge that as well as your 3 year
parts and labour warranty you have
the added peace of mind of dedicated
helplines and web support.
GB-0803-14
14.4 VOLT
User Guide & Warranty
AFTER SALES SUPPORT
UK HELP LINE:
0905-1460005
IRELAND HELP LINE:
1520-932626
WEB SUPPORT:
www.heltec.eu
Advertisement
Table of Contents
Related Manuals for Power Craft 14.4 Volt CORDLESS HAMMER DRILL
Summary of Contents for Power Craft 14.4 Volt CORDLESS HAMMER DRILL
- Page 1 After Sales Support Service Center AFTER SALES SUPPORT 1520-932626 - E 0,15 / min. Now you have purchased a Power Craft product you can rest assured in the WEB SUPPORT knowledge that as well as your 3 year UK HELP LINE:...
-
Page 2: Warranty
Contents Warranty Introduction EC DECLARATION OF CONFORMITY We Ferm B.V. Machine data Lingenstraat 6, 8028 PM Zwolle, The Netherlands declare that the design and construction of the following machine, in the form supplied by us, comply with the requirements of the appropriate EC directives. Product Description: CORDLESS HAMMER DRILL Safety instructions Model: PCC-1440... -
Page 3: Exploded View
Exploded view Introduction Congratulations on choosing to buy a Powercraft Product By doing so you now have the assurance and peace of mind that comes with purchasing a product made by one of Europe’s leading manufacturers. All products brought to you by PowerCraft are manufactured to the highest standards of performances and safety, and, as part of our philosophy for customer service and satisfaction, are backed by our comprehensive 3 Year Warranty. -
Page 4: Machine Information
Machine information Parts list Technical specifications Position Description Specification 14.4 V — --- Bolt left for chuck 502060 Voltage Chuck 502061 Charger voltage 230 V Charger frequency 50 Hz Left/right switch 406656 Battery output 1.5 Ah Switch 406654 Charging time 1 - 2 hour Battery CDA6031... -
Page 5: Safety Instructions
Safety instructions Explanation of the symbols Read instructions carefully. In accordance with essential applicable safety standards of European directives. Class II machine – Double insulation – You don’t need any earthed plug. Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. -
Page 6: Maintenance
Safety instructions Maintenance Make sure that the machine is not live when carrying out Always recycle batteries. maintenance work on the motor. The machines have been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper machine care and regular cleaning. -
Page 7: Charging Battery
Charging battery Safety instructions The battery provided is not charged. Before using it for the first time leave it 3) Personal safety to charge for 1 - 2 hours in order for it to reach its full capacity. The total a. -
Page 8: Charging The Battery
Safety instructions Charging the battery f. Use the power tool, accessories and tool bits etc., in accordance with these Charging instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. -
Page 9: Operation
Operation Safety instructions Tips Important safety notes on charger and battery • Use only bits that fit properly in the head of the screw. • When driving larger and/or longer screws into hard materials, it is If you come into contact with acid from the battery, rinse it off advisable to drill a pilot hole first. - Page 10 Safety instructions Operation 12. A damaged battery or one that can no longer be charged must be Hammer drilling disposed of as special waste. Do not discard it with household waste. 13. Never throw the battery onto a fire or into water. This can cause explosions! Electrical safety Always check that the voltage on the battery pack corresponds to...
-
Page 11: Mounting Accessories
Operation Mounting accessories Adjusting the torque Prior to mounting an accessory always remove the battery. Attaching and removing drill bits Fig. E The appliance has 16 different torque settings with which to set the power for driving and removing screws. •... - Page 12 Mounting accessories Operation Connecting and removing the battery Adjusting the speed Fig. C Fig. D Ensure that the exterior of the battery or tool is clean and dry The appliance has two drill speeds. before connecting the charger. • For slow drilling or for driving or removing screws, set the speed selection switch (4) to '1'.
Need help?
Do you have a question about the 14.4 Volt CORDLESS HAMMER DRILL and is the answer not in the manual?
Questions and answers