How To Change The Date And Time; How To Set Sleep Parameters - Ingenico EFT930G User Manual

If Waiters Already Exist
If Default Waiters exist on your terminal and you wish to add
a named waiter, this screen will be displayed. You MUST
delete a Default Waiter before a named waiter can be
added. Press the GREEN button.

31. How to Change the Date and Time

The terminal has a built in clock which maintains the current date and time. If necessary you can also
change the date and time manually. Please note: This may need to be done twice a year when the
clocks change.
1. At the READY prompt, press the MENU button twice. Use
the arrow buttons to view the available options and press
the GREEN button when the Select Function option is
highlighted.
2. Key enter the number 30 and press the GREEN
button. You will then be asked to swipe the Supervisor Card
or key in Supervisor code.
3. The current date will be displayed. Re-key the correct date
and press the GREEN button.
4. The current time will be displayed. Re-key the correct time
and press the GREEN button.
The terminal will return to the READY prompt.

32. How to Set Sleep Parameters

This function allows you to set the time when the terminal is not in use before it goes into sleep mode.
Having the sleep parameters enabled will save on battery life.
1. At the READY prompt, press the MENU button twice. Use
the arrow buttons to view the available options and press
the GREEN button when the Select Function option is
highlighted.
2 Key enter the number 38 and press the GREEN button. You
will then be asked to swipe the Supervisor Card or enter
Supervisor code.
Page 30
Waiters Already Exist
Delete ALL if you wish
to remove
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
SET DATE/TIME
Enter Current Date
and then press ENTER
SET DATE/TIME
Enter Current Time
and then press ENTER
SYSTEM MENU
Totals
Print Function Codes
Select Function
Key in Function Code
and then press ENTER
dd/mm/yy
dd/mm/yy