Page 2
Having supported my products for over thirty years, I have learned from the story they tell. Gallien-Krueger is a reflection of that story, and has a commitment to support that legacy. Just as the products I created...
Page 3
700RB-II & 1001RB-II Table Of Contents Safety Information Quick Start/Tech Talk Front Panel Controls Rear Panel/Bi-Amp Specifications Warning! This amplifier is capable of producing high sound pressure levels. Continued exposure to high SPL’s can cause damage to your hearing. Always set the volume at a safe listening level or use hearing protection if the unit is operated at higher levels.
700RB-II & 1001RB-II Safety Information Earth Grounding Connection: To prevent electric shock, do not remove the grounding plug on the power cord, or use any plug or extension cord that does not Please read all enclosed safety precautions before have a grounding plug provided. Make certain that the connecting or operating this product.
700RB-II & 1001RB-II Quick Start The Valve Effect (Boost): Your GK amplifier Connect your cabinets: Connect your GK bi-amp incorporates what we call the Valve Effect, or equipped or standard speaker cabinets to the ¼” or Speakon G.I.V.E (Gate Induced Valve Effect technology).
700RB-II & 1001RB-II 17 18 19 20 23 24 Front Panel Features Balanced Direct Out: An electronically balanced low Low Mid: Active band pass type control which boosts impedance output that you can run to your P.A. system and cuts at about 250Hz.
700RB-II & 1001RB-II AC INPUT ~120V/60Hz Rear Panel Features AC Receptacle: Standard IEC receptacle. The power Speakon Outputs: High current twist lock Speakon output cord plugs in here. connectors. Pins 1+ and 1- send a full range signal from 700W or 480W Amp Only: ¼” speaker output jacks.
Need help?
Do you have a question about the 700RB-II and is the answer not in the manual?
Questions and answers