Operation Of Remote Control - Gree Split Air Conditioner Owner's Manual

Operation of remote control

Names and functions of remote control buttons
Note: Be sure that there are no obstructions between receiver and remote control; Don't drop
or throw the remote control; Don't let any liquid in the remote control and put the remote control
directly under the sunlight or any place where is very hot.
Signal transmitter
FAN AUTO
HEALTH
AIR
HUMIDITY
FILTER
TURBO
ON/OFF
Remote control
FAN
X-FAN
TEMP
TURBO SLEEP
ON/OFF
ON/OFF button
Press this button, the unit will be started or stopped,
which can clear the timer or sleeping function of
last time.
MODE
Mode button
Press this button, the running mode will change as
below.
AUTO
COOL
DRY
FAN
HEAT (Note:no for coolling
only unit)
( / )
When press +button , the setting temp. will be
increased by 1
setting temp. will be decreased by 1
X-FAN The temp. will be changed quickly
the button continuously and setting temp. range
is
HOUR
ON/OFF
FAN
Press this button once, fan speed will change
MODE
as below:
Note:Under the Dry mode, the fan speed isn't
TIMER
adjustable, low fan speed is imperative,
LIGHT
but when operating this button, the wireless
remote control will send this signal.
Simpleness swing mode is defaulted for wireless
remote control, in this mode, press this button,
could turn on or turn off the Up and down
swing function.
When unit is turned off, synchronously press
"+" and Up and down swing buttons, it could
be switched between the simpleness swing
mode and stationary swing mode, at this time,
In Stationary swing mode, press this button,the
angle for Up and down swing as show in below:
When up and down swing louver is working,
when turn off the unit, the siwng louver will
immediately stop at current position.
shows up and down swing louver swings back
and forth as show in the above figure.
button
T E M . P ( / )
,When press -button,the
by pressing
o o
(61 F~86 F).
FAN speed button
Auto
Low speed Middle speed
High speed
Swing up and down button
blinks 2 seconds.