Enabling Amd Crossfire Pro - AMD FirePro V7900 SDI User Manual

28 AMD CrossFire™ Pro Technology
Enabling AMD CrossFire™ Pro
Note: The CrossFire option will not appear unless two workstation cards are installed
in the system and connected using an AMD CrossFire Pro interconnect.
1. Based on the navigation layout of the Control Center application window, do one
of the following:
2. Click Configure.
3. From the Graphics Adapter list, select the graphics card to act as the display GPU.
4. Select Enable CrossFireX™.
Note: The Choose from the following Rendered GPU combinations drop-
down list automatically populates with all available render GPUs based on the
selected display GPU. The list displays only GPUs that can be enabled for
AMD CrossFireX. Other combinations are not listed here but may be listed on
the CrossFire™ ▷ Diagnostics page.
5. From the list, select the appropriate combination.
Note: If the selected combination is not the most optimal choice for your system,
a message appears at the bottom of the page notifying you of this.
6. Click Apply.
In some configurations, when AMD CrossFire is enabled, GPU Accelerated Physics is
automatically disabled for all cards in the configuration as are all displays except the
one used by AMD CrossFire.
AMD FirePro™ V7900 SDI
➭
Navigation menu—On the Graphics menu, click CrossFireX™.
➭
Navigation tree—From the tree in the Graphics Settings tab, click
CrossFireX™.
© 2011 Advanced Micro Devices Inc.