Page 1
User’s guide ‘‘RUH’’ series Economical unit heater Replacement component list included This unit complies with the CSA and UL standards For further information or to consult this guide on line, please visit our Web site. INSRUH1108...
Page 2
If needed, refer to a specialist (industrial and commercial buildings) who will be able to calculate these heat losses and optimize the required capacity or consult the “Online heating calculation” section of the Stelpro Design Web site (residential buildings).
ELECTRICAL CONNECTION The ground fault protection connection must be made by connecting the green wire coming from the circuit breaker panel to the green screw located inside the junction box of the heater. N.B. All electrical connections must be made by a qualified electrician, according to the electrical and building codes effective in your region.
Page 5
# DIAgRAM # PART DESCRIPTION BLA-005 FAN BLADE 9" 26° 5B BOUT-003 THERMOSTAT KNOB (BLACK) ELF-RUH2 ELEMENT (KIT) 2000 W-240 V ELF-RUH3 ELEMENT (KIT) 3000 W-240 V ELF-RUH4 ELEMENT (KIT) 4000 W-240 V ELF-RUH5 ELEMENT (KIT) 5000 W-240 V MO-016 ENCLOSED MOTOR (240 V) PROT-006 THERMAL PROTECTION (AUTO.) (L150)
The warranty is limited to the repair or the replacement of the unit or the refund of its purchase price, at the discretion of Stelpro. Any parts replaced or repaired within the warranty period with the written authorization of Stelpro will be warranted for the remainder of the original war- ranty period.
Need help?
Do you have a question about the RUH Series and is the answer not in the manual?
Questions and answers