Cable Diagnostics/Password - EnGenius EGS2108P User Manual

Cable Diagnostics
The Cable Diagnostics setting provides information about
where connectivity may have failed on the Ethernet
cable. The tests use Time Domain Reflectometry (TDR)
technology to test the quality of the Ethernet cable for any
disconnection or failure points.
To access the page, click Cable Diagnostics under system
menu
Port: Select the port to which the cable is connected.
Status: Shows the state of the cable.
Cable Length: Shows the approximate cable length.
Test: Click Test to perform the cable tests for the selected
port.
Password
Click Password from the System section. The password
screen appears. You can set a new password. You must
enter the old and new passwords and confirm the new one.
Click Apply to enable the new password.
To access the page, click Password under system menu.
Password: Enter your password; the default password is
password.
New Password: Set the new password for the Switch
Confirm: Enter the new password again
Apply: Click APPLY to update the system settings.
20