Configuring System Bios - HP Z220 SFF Maintenance And Service Manual

Configuring system BIOS

To set up a RAID configuration, the emulation mode must be set to RAID+AHCI in the Computer Setup
(F10) Utility. This is the default setting. If the mode has been changed, follow these steps to change it
back.
1. During startup, press
2. Using the arrow keys, navigate to:
a.
Desired language, then press
b. Storage > Storage Options, then press
c. SATA Emulation > RAID+AHCI, then press
3.
Navigate to:
a. Advanced > Power-On Options, then press
b. POST Messages > Enable, then press
4.
Navigate to:
a. Advanced > Device Options, then press
b. SATA RAID Option ROM Download, then press
c. Enable, then press
5. Navigate to File > Save Changes and Exit, then press Enter.
6.
Press Enter
F10 to enter the Computer Setup (F10) Utility.
F10 to accept the new settings.
to accept the changes when prompted.
Enter.
Enter.
F10 to accept the new settings.
Enter.
F10 to accept the new settings.
Enter.
Enter.
Configuring Intel SATA RAID
169