Reset Odometer - CycleOps Joule User Manual

CHAPTER 7: DEVICE MENU
DEVICE MEMORY
The Memory page allows the user to monitor and manage the space available on the Joule GPS as well as set some recording
and saving attributes. Also the odometer value can be monitored, updated or reset. Ride summary data, used for history reports
(Chapter 5), and Ride file data can be cleared here.
FROM DASHBOARD
9:34
INT
Ride
History
[ENTER]
Sensors
Press & Hold
Training
3 sec. to enter
Navigation
Menus. Scroll
User
to Training;
Device
Press •[ENTER] ;
Select an option,
Back to Dashboard
MEMORY MENU MENU INPUT OPTION
Record Control Speed/Heart Rate. Sets when data will be recorded. Select Speed to record whenever
speed is present (via either the hub, a speed sensor or the GPS) and greater than
3.6 kph (2.2 mph). Select Heart Rate to record when a heart rate is present.
End Ride Time 15, 30, 60, 90 minute and Never options for auto saving a ride once it is ended.
For example: Selecting the 30 min option would cause the ride to automatically
save after 30 minutes of inactivity. "Never" means the user will save manually.
Odometer
Displays total miles or kilometers accumulated since device was put in service or
since last reset. This number is editable by selecting it and pressing [ENTER];
Increase/decrease each digit using +/- buttons; Enter moves to next digit. Press
Enter twice at end of field to exit field.
Memory Remaining
The amount of ride storage space available, in terms of ride time.
Clear Ride Memory
Clears all ride files from device. Does not clear ride history data used for reports.
Clears all ride history data (no data available for reports).
Clear History
71º
A
Main Menu
9:34
A
Device
Date and Time
Display
Memory
Altimeter
About Joule
Back to Main Menu
9:34
A
Memory
Record Control
Speed/HR
End Ride Time
15-90 min
Odometer
1526

Reset Odometer

Memory Remaining
33.4 Hours
Clear Ride Memory
Clear History
Back to Device
Joule GPS User Guide page 32