Page 1
UDRC14 ACCESSORY CAMERA Compatible with UDR444 Wireless Video Surveillance System If any items are missing or damaged, contact our Customer Care Line immediately. Never use damaged products! Need Help? Get answers 24/7 at our website: www.uniden.com. OWNER’S MANUAL...
Page 2
2. Visiting our customer support website at www.uniden.com. 3. Calling our customer care specialists at 1-817-858-2900 or 1-800-658-8068. Uniden surveillance products are not manufactured and/or sold with the intent to be used for illegal purposes. Uniden expects customers’ use of these products to be in compliance with all local, state, and federal law.
Important Safety precautIonS # this manual contains important information about this product’s operation. If you are installing this product for others, you must leave this manual or a copy with the end user. When using your equipment, always follow basic safety precautions to reduce the risk of fire, electric shock and injury to persons, including the following: x The cameras included with your monitor are weatherproof and have an IP65 weather rating.
Clean only with a dry cloth. Failure to follow the instructions in this operating manual will void the warranty. Uniden assumes no liability for damages to property or injury to persons caused by improper handling or failure to comply with these safety instructions.
GettInG StarteD Install the Base The following tools are required: • Electric Drill • 5mm Drill Bit • No. 2 Philips Screwdriver 1. Hold the base of the camera stand where you want to mount it and mark the location of the screw holes. 2.
Consult your local waste management authority or a recycling organization like Earth911.com to find an electronics recycling facility in your area. x If you are unable to locate proper recycling facilities in your area, please return this product to Uniden for recycling. FCC Compliance Information Part 15 Compliance Statement This device complies with Part 15 of the FCC Rules.
(E) used in any conjunction with equipment or parts or as part of any system not manufactured by Uniden, or (F) installed or programmed by anyone other than as detailed by the owner’s manual for this product.
Page 8
& accessories originally packaged with the Product. Include evidence of original purchase & a note describing the defect that has caused you to return it. The Product should be shipped freight prepaid, by traceable means, to warrantor Uniden America Service 4700 Amon Carter Blvd. Fort Worth, TX 76155...
Need help?
Do you have a question about the UDRC14 and is the answer not in the manual?
Questions and answers