Page 2
These trademarks may not be used without the express permission of Sena. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sena is under license. ® iPhone, iPod touch are registered trademarks of Apple Inc. Zumo™ is a trademark of Garmin Ltd. or its subsidiaries. TomTom™ is the trademark or registered trademark owned by TomTom International B.V.
7.4 Bluetooth GPS Navigation Pairing DISPOSAL CERTIFICATION AND SAFETY APPROVALS 7.5 Pairing with the Sena SR10, Bluetooth Two-way Radio Adapter • FCC Compliance Statement 8. PAIRING WITH SELECTIVE PROFILE: HFP OR A2DP STEREO 8.1 Phone Selective Pairing: HFP for Phone Call Only •...
• Bluetooth stereo headset for Bluetooth audio devices such as MP3 players Thank you for choosing the Sena SMH10R, Low Profile Bluetooth • Bluetooth stereo headset for Bluetooth GPS navigations Stereo Headset and Intercom. With the SMH10R, you can call •...
3. INSTALLING THE SMH10R ON YOUR HELMET • Velcro Pads for Main Unit To securely install the main unit of the SMH10R, you can use • Double Sided Adhesive Tapes for Main Unit the velcro pad or double sided adhesive tape. Please follow the procedure below.
Page 7
SMH10R 4. Attach the main unit to the velcro pad of your helmet. is facing close to your mouth when you wear the helmet. 5. Place the speakers to the helmet along with the velcro pads, In the case of the wired microphone, attach the enclosed velcro centered to your ear, in the ear pockets of the helmet.
It takes about 2.5 hours to be completely charged. You can use the SMH10R while charging. It is especially helpful when you use a cigarette charger for a long road trip.
SMH10R prompt, “Low battery”. 5. VOLUME ADJUSTMENT 4.5 Checking the Battery Level You can check the battery level in two different ways when the You can easily adjust the volume by tapping the (+) Button or the (-) headset is powering on.
(7) VOX sensitivity (2) Multipoint pairing (8) Voice prompt (3) Phone selective pairing (9) Delete all pairings You can set the configuration of the SMH10R by the voice menu (4) Media selective pairing (10) Factory reset instruction as below. (5) VOX phone (11) Exit configuration 1.
SMH10R 6.1 Mobile Phone Pairing pairing”. Please refer to section 8 for more details on phone selective pairing. If you tap the (+) or (-) Button, you can exit from Voice Prompt “Phone pairing” the phone selective pairing mode. Factory Default 6.4 Media Selective Pairing...
SMH10R Tap the (+) Button or the (-) Button until you hear a voice prompt, “Hello” or any other word loudly. However, the phone VOX feature does not work if you are connected to intercom. This is enabled “VOX sensitivity”. By tapping the Center Button, it will lead you from the factory but you can disable this.
Tap the Center Button To exit voice configuration menu and get back to stand-by mode, To delete all Bluetooth pairing information on the SMH10R, tap the tap the (+) Button or (-) Button until you hear a voice prompt, “Exit (+) Button or the (-) Button until you hear a voice prompt, “Delete...
Multipoint Pairing None Phone Selective Pairing None Before using the SMH10R Bluetooth headset with any of Bluetooth Media Selective Pairing None devices for the first time, you need to do the pairing operation. It can be paired with Bluetooth mobile phones, Bluetooth...
SMH10R Sena SMH10R in the list of the devices detected on the mobile SMH10R in the list of the devices detected on the mobile phone. phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
Bluetooth stereo music streaming, multipoint pairing is recommended for the GPS connection. Multipoint Bluetooth pairing allows the SMH10R to connect two HFP devices at the same time: mobile phone and GPS navigation. Follow the steps below to pair the GPS using the multipoint pairing.
Page 17
Bluetooth stereo music source, you can pair the GPS to the SMH10R by following the simple procedures in “7.1 Mobile Phone Pairing”. When you do this, the SMH10R thinks the GPS is a mobile phone. But SMH10R can directly pair an additional mobile phone. Smart Phone...
SR10 user's guide for details. navigation systems. If you pair the SMH10R with a SR10 by multipoint pairing, the SMH10R is able to have two HFP devices at the same time: mobile phone and Sena SR10. 1. To enter into the voice configuration menu, press and hold the Center Button for 10 seconds until you hear a voice prompt, “Configuration menu”.
A2DP stereo music only or for mobile phone handsfree only. This 1. To enter into the voice configuration menu, press and hold the instruction is for advanced users who want to pair the SMH10R to Center Button for 10 seconds until you hear a voice prompt, their smartphones only with one selective profile: A2DP stereo for “Configuration menu”.
Conversation The SMH10R can be paired with up to three other headsets for Bluetooth intercom conversation. 1. Turn on the two SMH10R headsets (A and B) that you would like Pairing A & B to pair with each other. 2. Press and hold the Center Button for 5 seconds, then you will 4.
Please follow the same procedure as above to pair with these headset models. Note: The SMH5 cannot participate in three-way or four-way conference intercom with the SMH10R. The SMH5 has a limited capability of having two-way intercom with each other or with other Sena headset models.
Bluetooth audio device also supports the AVRCP, you can use Button for 1 seconds until you hear a mid-tone single beep. the SMH10R to remotely control music playback. You not only can adjust the volume but also use the functions such as play, pause, next track and previous track.
4. To reject a call, press the Center Button for 2 seconds until you If you have second mobile phone connected with the SMH10R by hear a beep while the phone is ringing. multipoint connection, you can answer the incoming call to the 5.
SMH10R 13. TWO-WAY INTERCOM Terminate 13.1 Start and End Two-way Intercom End Two-way Intercom Conversation 1. You can start a one-on-one intercom conversation with any intercom friend by tapping the Center Button: Single tapping to intercom friend intercom friend intercom friend...
13.4 Intercom and GPS choose whether to 1) answer the mobile phone call and stop the If you pair a Bluetooth GPS to the SMH10R as described in 6.3 of intercom conversation, or 2) reject the phone call and stay on...
As described in 6.4 of this user's guide, you can use a two-way radio and SMH10R Bluetooth intercom simultaneously by using the Sena SR10, a Bluetooth Two-way Radio Adapter, along with the SMH10R. Incoming audio from the two-way radio is not interrupting an intercom conversation but is heard in background. Smart Phone...
1. You (A) need to be paired with two other friends (B & C) for three-way conference intercom. First Friend Second Friend 4. Now you (A) and two SMH10R intercom friends (B & C) are having a three-way conference intercom. First Friend Second Friend...
SMH10R Center Button Result Press for 1” Disconnect (B) & (C) Single tap Disconnect (B) Double tap Disconnect (C) First Friend Second Friend End Three-way Intercom 14.2 End Three-way Intercom When you are a member of an active three-way conference...
You can have four-way conference intercom with three other connection with one of the two intercom friends accordingly. SMH10R users by adding one more intercom participant to the However, when you disconnect the second friend (C) by three-way intercom. While you are having three-way intercom as double tapping the Center Button, you will be disconnected above in section 14.1, a new participant (D), who is an intercom...
2 seconds, or wait for the person on the mobile phone line to intercom conversation, you may hear static noise and eventually end the call. the intercom will be disconnected. In this case, the SMH10R Tap the Center Button while having a mobile automatically tries to reconnect the intercom every 8 seconds...
SMH10R 19. RESET TO FACTORY DEFAULT SETTINGS 21. CASE STUDY When the SMH10R is not working properly or is in faulty status for Case 1 any reason, you may reset by pushing the pin-hole reset button •iPhone for mobile phone call and stereo music streaming at the back of the headset main unit.
•iPhone for mobile phone call and stereo music streaming •iPhone for mobile phone call via Zumo 660/665 660/665 for GPS voice instruction • Z umo 660/665 for GPS voice instruction and stereo music •Zumo •SMH10R for two-way intercom streaming •SMH10R for two-way intercom Pairing: Refer to Zumo...
•Feature phone for mobile phone call •iPhone for mobile phone call •iPod Touch for stereo music streaming •iPod Touch for stereo music streaming ® •Two other SMH10R for three-way conference intercom Rider2 for GPS voice instruction •TomTom •SMH10R for two-way intercom Feature Phone...
•iPhone for mobile phone call and stereo music streaming • S ena SR10 for two-way radio, GPS voice instruction, and The SMH10R has an external, rechargeable battery. The radar detector alarm battery can be charged and discharged hundreds of times, •SMH10R for two-way intercom...
4. Do not attempt to open the SMH10R collection point for recycling. 5. Do not drop or knock the device. Rough handling can break internal circuit boards and fine mechanics.
This product is CE marked according to the provisions of the is encouraged to try to correct the interference by one or more of R&TTE Directive (99/5/EC). Hereby, Sena declares that this the following measures: product is in compliance with the essential requirements and •...
Bluetooth SMH10R headset, including all derivative models irrespective of SIG, Inc. and any use of such marks by Sena is under license. its commercial name or branding (the “Device”), and stop your Other trademarks and trade names are those of their respective Vehicle on the roadside prior to initiating or receiving calls.
Page 38
Device is used by the original purchaser or any third party. these substances before or during the use of the Device. Sena hereby notifies you that using this Device may also be in 4. You fully acknowledge our warnings and understand that: (a)
Device for a full refund (see refund agrees to insure the Product or assume the risk of loss or damage option below). in transit, to prepay shipping charges to Sena, and to use the original shipping container or equivalent. Two-Year Limited Warranty Limitation of Liability Sena Technologies, Inc.
IN NO EVENT WILL SENA OR ITS DEALERS TOTAL LIABILITY WARNING EXCEED THE PRICE PAID FOR THE PRODUCT. Sena informs that using this device in public traffic may not be Return for Full Refund authorized by the law. Please check your local law and use this...
Page 41
1.0.0 www.senabluetooth.com User's Guide for Firmware v4.2...
Need help?
Do you have a question about the SMH10R and is the answer not in the manual?
Questions and answers