NOTICE IF YOU ENCOUNTER ANY DIFFICULTIES, REFER TO THE USER’S MANUAL TECHNICAL SPECIFICATIONS OR VISIT OUR WEBSITE AT www.coleman-tools.com OR CALL CUSTOMER SERVICE AT 1-888-202-1118 FOR HELP. Pressure Washer Specifications Peak pressure: 1600 PSI Power Source Requirement: 120 V / 60 Hz Electrical cord: 23’...
This warranty is non-transferable and only applies to products that were sold in and reside in Canada. If you have any questions or comments, visit our web site at www.coleman-tools.com or call our toll free customer service line at 1-888-202-1118.
IMPORTANT PRECAUTIONS – READ FIRST IMPORTANT PRECAUTIONS – READ FIRST WARNINGS WARNING - Risk of Injury Do Not Direct Discharge Stream at Persons. When using this product, basic precautions should always be followed: • High-pressure jet can be dangerous if misused. • Read all the instructions before using the product. • The jet must not be directed at persons, animals, electrical devices, • Water spray must never be directed toward any electric wiring, devices or directly or the unit itself. toward the pressure washer machine itself, or fatal electric shock may occur. • To reduce the risk of injury, do not operate the machine near children.
Part Name Parts Number product. Accessory bracket 300101-000-0003 • Do not use damaged extension cords. Examine extension cord before using and Water container 300101-000-0002 replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect.
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS Surface Preparation Before starting any cleaning task, it is important to inspect the area for objects that could create a hazard. Remove any objects from the work area that could be tripped over, such as toys or outdoor furniture.
Page 7
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS If tap water is available in the premises, you can connect the pressure washer directly with a garden hose. Attached quick-connect coupling to garden hose (hand tighten only) and Make sure the ON/OFF switch is on the Completely unwind power cord and connect to inlet adapter.
ASSEMBLY AND OPERATING INSTRUCTIONS ASSEMBLY AND OPERATING INSTRUCTIONS SHUTTING DOWN AND CLEANING UP WORKING WITH DETERGENTS Turn the switch to “OFF” (0) position. Working with detergent ensures a quick soaking of the dirt, and allows the high- pressure water to penetrate and remove the dirt more effectively. Always spray Unplug the power cord from the outlet.
OPERATING INSTRUCTIONS WINTERIZING AND LONG-TERM STORAGE Optimum Winterizing Procedure CAUTION Winterizing your pressure washer will help protect and prolong its life. We strongly Never use: recommend you follow the below steps using Pressure Washer Antifreeze (039-8602-0). • Bleach, chlorine products and other corrosive chemicals This will keep the internal parts lubricated, protected from rust, and prevents the pump from • Liquids containing solvents (i.e., paint thinners, gasoline, oils) freezing.
CLEANING AND MAINTENANCE TROUBLESHOOTING Connections Disconnect the machine from the power source before making any repairs. Connections on pressure washer hoses, gun and spray wand should be cleaned regularly and lubricated with non-water soluble grease. Symptom Cause Solution Motor will not start. On/Off switch is in the Turn switch to the “ON”...
Turn off IF YOU ENCOUNTER ANY ADDITIONAL DIFFICULTIES NOT LISTED, machine and purge pump VISIT OUR WEBSITE AT WWW.COLEMAN-TOOLS.COM by squeezing trigger gun OR CALL CUSTOMER SERVICE AT 1-888-202-1118 FOR HELP. until a steady flow of water emerges through the nozzle.
Need help?
Do you have a question about the 300101 and is the answer not in the manual?
Questions and answers