Lr-List Restrictions - Lucent Technologies RPSD User Manual

Remote Port Security Device
User's Guide 555-024-402
3 RPSD System Administration
Command Functions
LR—List Restrictions
Syntax and Parameters
To list the time periods and days for time restrictions for all restriction IDs A to N:
lr
ENTER
To list the time period and day for time restriction for a specific restriction ID:
lr<restr_id>
Parameter
lr
<restr_id>
Description
Use the List Restrictions command to list the administered time periods and days
during which time restrictions can be placed on one or more users. Up to 14
separate time periods can be created; each is assigned a single-character code
from "A" to "N." Use the Change Restrictions command to set the restriction time
periods and to associate a code letter to each period of time and day defined
(see instructions on page 3-22). Then apply the code to a specific user or users
using the User Restriction command (see instructions on page 3-52).
ENTER
Description
List Restrictions command
A single character from A–N (14 possible restriction codes)
used as a code to identify the specific time periods and
days during which time restrictions may be placed on one or
more users. The code is assigned to the users you wish to
restrict for that period by using the User Restrictions
command (described on page 3-52).
Issue 1
October 1996
Page 3-32