Reassembling The System - NEC VERSA LXi Service And Reference Manual

Gently rest the keyboard on top of the base unit to view and access the dip switch block. Be
5.
careful not to twist or disconnect the keyboard cable.
Locate the dip switch block. Using a fine-tipped object, change switch 5 to "ON" to enable
6.
the BIOS flash.
Never use a pencil to change switch settings. Residue from the pencil
can damage the system.
BIOS flash switch enabled
Dip switches 2, 3, 4, and 5 set to "On."
Reassemble the system as follows:
7.
Lift up the keyboard and align the tabs on the front of it with the grooves in the system.
!
Reseat the keyboard in its original position.
!
! Slide the keyboard retainers back onto the system.

Reassembling the system

Follow the instructions later in this chapter, "Performing the BIOS Update."
8.
System Configuration and Setup 2-25