Removing A Headlamp; Changing A Bulb - Ford TRANSIT CUSTOM Owner's Manual

6. Remove the wiper blade.
7. Install in the reverse order.
Note: Make sure that the wiper blade locks
into place.

REMOVING A HEADLAMP

1. Open the bonnet. See Opening and
Closing the Bonnet (page 128).
2. Remove the screws.
3. Lift the outer side of the headlamp to
disengage it from the lower fixing point
and upper location tab.
4. Pull the headlamp as far as possible
toward the centre of your vehicle and
remove.
Maintenance
5. Disconnect the electrical connector.
Note: When fitting the headlamp, make
sure that you reconnect the electrical
connector correctly.
Note: When fitting the headlamp, make
sure that you fully engage the headlamp in
the lower fixing point.

CHANGING A BULB

Switch the lamps and the ignition off.
Let the bulb cool down before
removing it.
Note: Only fit bulbs of the correct
specification.
Note: We recommended that you see an
authorised dealer to change the bulbs if your
vehicle is fitted with air conditioning. Some
bulbs are difficult to access.
Note: You will need to remove the
headlamp to change the headlamp, side
lamp or front direction indicator bulbs.
Note: The following instructions describe
how to remove the bulbs. Fit replacements
in the reverse order unless otherwise stated.
136
WARNINGS