Removing The Seats - Ford TRANSIT CUSTOM Owner's Manual

Folding the Seatback
WARNING
When folding the seatbacks down,
take care not to get your fingers
caught between the seatback and
seat frame.
Note: Rear row occupants can sit next to a
seat in the same row that has the seatback
in the fold flat position.
Folding the Seats Forward
Transit Custom (TTF) Vehicles Built From: 14-01-2013
Seats
1. Pull the lower release straps outward
and hold them there.
2. Lift the seat upward.
Folding the Seats Down
1. Pull the upper release straps down and
hold them there. At the same time pull
the seat down to lock into the floor.
2. Push the seatback to the upright
position after releasing the handle and
pull strap.

Removing the Seats

Double seats can weigh up to 126 lb
(57 kilogrammes). Do not attempt
to lift or carry any seat on your own.
Note: Store the seat in a dry and secure
place.
1. Fold the seat forward.
2. Pull the release handle up and hold it
there.
3. Gently pull the seat backward until the
front of the seat frame clears the
catches on the floor.
4. Remove the seat.
Install the seat in the reverse order.
80
WARNING