Hazard Spot Warning - Ford FOCUS Owner's Manual

4. Press the OK button. The system will
search for destinations with similar
spellings.
5. Use the arrow buttons to select a
destination from the list and press the
OK button to confirm your destination.
Route Displays
Map Display
Press the MAP button to view map mode.
This view will show your current location
with your vehicle in the center shown as
an arrow surrounded by a circle. The arrow
will face in the direction of travel.
The information on the top line gives the
name of the current road, or the next road
to take if a turn is approaching.
You can change the way the map is
displayed by altering the zoom and
orientation settings. Press function button
one. The current map scale is shown on
the display.
Map scale settings may be set between
0.05 miles to 500 miles or 50 meters to
500 kilometers, with an auto setting on
the top. The auto setting continuously
changes the map scale according to
vehicle speed and the road type being
driven.
You can use the arrow buttons to change
the view to 2D, turn-by-turn, 3D or a clean
view.
Zoom
This feature will automatically increase
the zoom on the map display at times
when you are required to make a turn, or
perform more complex maneuvers. Shortly
after the zoom scale will return to the
previous level when in auto mode.
Manual: Press function button one and
adjust the setting using the left or right
arrow buttons. Press OK to confirm your
setting.
Focus (CB8) Vehicles Built From: 26-08-2013, Vehicles Built Up To: 31-12-2013
Navigation
Auto: Press function button one and using
the up or down arrow key select the auto
option. Press OK to confirm your setting.
Move
When you are in map mode, press function
button two. You can now use the arrow
buttons on the audio unit to move around
the map.
Press function button two again to return
to the original view.
Navigation Display
After commencing a navigation route, the
default screen is the main navigation
screen.
Once an active route is underway, guidance
will be given by on-screen information and
voice prompts. Whichever audio source
you wish to leave the unit in, basic turn by
turn and distance information will remain
on the screen in the form of a graphic inset.
You do not need to leave the unit on the
main navigation screen when you are
navigating a route. Press the MAP button
at any time to return to the main navigation
screen. Slightly more detailed information
on your route may be available using the
main navigation screen if required.

Hazard Spot Warning

The system supports a hazard spot
warning feature which informs you with
visible and audible feedback about
hazardous traffic areas. You can switch
the system on and off using the
information and entertainment display
menu. See Assistance options in the
navigation menu.
Note: This feature is only available in
certain countries.
272