monster tower double barrel tower speakers Owner's Manual

Double Barrel Tower Speakers

Installation Instructions

Monster Tower, Inc.

1704 Henry G. Lane Street

Maryville, TN 37801

THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY

WITH YOUR NEW SPEAKERS, PLEASE CONTACT US. Our entire purpose as a company is to

offer great products at affordable prices that our customers love.

Please take a few minutes to read the installation instructions and become familiar with the

speaker and installation before beginning to ensure a high quality, trouble free installation and

use. If you have any questions during your installation give us a call at 877-77-Tower or e-mail

Support@MonsterTower.com

NOTES ON INSTALLING AND USING YOUR NEW WAKETUNES SPEAKERS

For best performance, provide 100W-RMS at 4 Ohm to each speaker

Always remove the wires from the binding posts before removing speakers

Speakers can be easily removed by loosening the locking set screw, removing the detent

pin and lowering the speaker

Speakers can be pointed to the rider or the front of the boat by loosening the locking set

screw, removing the detent pin and rotating the speaker

Regularly check all hardware to make sure it is tight

Although the speakers are weather resistant and designed for outdoors use, do not spray

directly into the grill with high-pressure water

Remove speakers for trailering to prevent bugs and road debris that need to be cleaned

Handle the speakers with care as the aluminum enclosures can be damaged if dropped

MTWTDB-V1-040105

and Owners Manual

1 of 1

Phone: 877-77-Tower

Fax: 877-232-6538

www.MonsterTower.com

Support@MonsterTower.com

Table of Contents

Need help?

Do you have a question about the double barrel tower speakers and is the answer not in the manual?

Page 1: Installation Instructions
Double Barrel Tower Speakers Installation Instructions and Owners Manual Phone: 877-77-Tower Monster Tower, Inc. Fax: 877-232-6538 1704 Henry G. Lane Street www.MonsterTower.com Maryville, TN 37801 Support@MonsterTower.com THANK YOU FOR YOUR BUSINESS. IF YOU ARE NOT COMPLETELY SATISFIED IN ANY WAY WITH YOUR NEW SPEAKERS, PLEASE CONTACT US.
Page 2 Speaker Bridge (shown on page 3) Detent Pin Locking Set Screw (shown on page 3) T-Handled Hex Wrench for Set Screw (not shown) Binding Posts Barrel Enclosures Speakers (actual speaker not shown) 2 of 2 MTWTDB-V1-040105 Copyright 2002-2005, Monster Tower, Inc.
Page 3 Once positioned, tighten the mounting post bolts to 20 ft-lbs. STEP 6: Attached your amp wires to the binding post and go wakeboarding! 3 of 3 MTWTDB-V1-040105 Copyright 2002-2005, Monster Tower, Inc.
Page 4 Any modifications or improper use, not approved in writing by Monster Tower, shall void this warranty. Monster Tower is not responsible for personal injury or damage to the boat caused by the use of this product. Monster Tower’s obligation under this warranty shall not include any transportation charges or costs of installation or any liability for direct, indirect or consequential damages resulting from delay or improper installation.