Matrox QID User Manual page 16

Software setup
If a TV or video recorder is connected to your Matrox product, you can use TV output mode to view
or record your display on your TV or video recorder. (To connect video devices to your computer,
page 13.)
TV settings have lower resolutions and refresh rates than typical computer monitor settings. Lower
refresh rates may result in more noticeable flicker.
Note:
America and Japan, among other places. The PAL standard is used in most of Western
Europe and in China, among other places.
If an incorrect TV standard is selected in Matrox software, the output from your computer
may not appear or record properly on your TV or your video recorder. To find out what
standard your TV or video recorder supports, see its documentation.
Windows 2000/XP – To adjust TV settings, access the
Matrox product
DOS – To change TV standard, insert your Matrox installation CD-ROM. Run the
program from the Sysutils folder on your Matrox CD-ROM. Click
select the correct TV standard, then click
program, see the Readme file in the Sysutils folder.
16 Matrox QID Series – User Guide
Two TV standards are supported for TV output. The NTSC standard is used in North
(see "Set up your display software", page
Multi-Display Setup
11).
. For more information on how to use this
OK
see
dialog box for your
PBIOSWin
and
Change TV Standard