Charging The Batteries - Zap Zappy 3 Pro Owner's Manual

Fuse (inside the battery bag)
Note: For professional
6
reference only.

CHARGING THE BATTERIES

Before you ride the tri scooter for the first time, i t is advised that
the unit is to be fully charged (4-6 hours) and fully discharged
(ride until the battery gauge indicates low battery) for at least
three cycles to maximize the efficiency of the battery. After
that, you should continue to charge the battery frequently, at
least once every 30 days to prolong the battery lifespan.
IMPORTANT:
Do not leave the battery uncharged for more than 3 months;
otherwise it will greatly reduce the battery lifespan.
TIP FOR BATTERY CARE: Charge the battery after each
use!
Option 1:
To charge the batteries, plug the charger into
the charger socket located on the rear side of
the battery/ controller compartment. Then
plug the charger into a wall outlet.
Option 2: (for professional use only)
Remove the screws from the battery compartment located at the
front part of the footboard. Disconnect the
wires. Lift the battery box. Connect the
battery and charger using the charger
convertible cable. Plug the charger into the
wall outlet.
7